5 out of 5
Customer Reviews
By
Christopher Lemke
Date: August 11, 2022
Have you ever found a correct fitting line wrench that would fit tight on Rusty brake line fittings and bleeders great for breaking those brake lines and bleeders loose first clamp on tightly then unclamp rotate 60 and clamp on again this helps break the rust loose in the threads since I have been using these vice grips for break jobs I have not broken any fittings off or strip them off
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Gene Bolton
Date: July 25, 2022
Stubborn brake lines have no chance! When my brake line wrench rounded the corners of a fitting, this tool saved me the expense of going to the brake shop. 100 worth the money.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Raoul Yeates
Date: July 12, 2022
Hunting for tools reviews and of course good old Youtube takes me to Torque test Channel. Bought this to get a seized nut off my car and first impression was this thing is too small. But don't let that fool you. it WILL remove that stubborn brake line MOST times. You may have to fiddle for space sometimes and also work it back and forth to free the line, but this is a MUST to have in your automotive tool kit.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Erin Joyce
Date: June 30, 2022
Very handy tool of last resort for all sorts of fasteners, especially hard brake lines
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
john c.
Date: June 16, 2022
used on butt fitting pipe joint, used slight pressure and was able to get out with out damaging the threads . i just would like see if the would make a second version in a huge XL. size, P. S. love your product.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Coronel velez U.S.A. MILITARY
Date: June 08, 2022
Muy bueno lo e usado varias veces lo recomiendo
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
william
Date: May 31, 2022
Grabs hydraulic lines even stripped ones
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Matt
Date: May 24, 2022
Great for tool for stubborn cummins aftreatment temp sensors! Put it on beat it with a hammer.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
XXX
Date: March 13, 2022
This large size holds most medium sized project items you might have . All gripping edges, including teeth, are smooth which keeps holdings from being scratched. Excels with items that are round-ish shape. Tighens tightly, built well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
mike
Date: March 03, 2022
the bull nose vise is a gripper.... well worth adding to tool box when you need the steady grab or lock down on a bolt.... there is something about the grip of the flat face .... really works well...
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
M.L.
Date: January 21, 2022
These vise grips do a great job on cylinders with least amount of marring versus channel locks or pipe wrenches.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Carlos Porras
Date: December 14, 2021
GREAT ITEM
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Baja 420
Date: December 05, 2021
I have a 4lw, 7lw and 10lw hex lock pliers. Provides a superior grip on hex nuts. The small 4LW is excellent for crimping electrical wire end connections. I use the 4LW mdl the most.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Spinner
Date: November 18, 2021
Grabbed and removed headless nails easily.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Spyder Lake
Date: September 02, 2021
The Vise Grip 10LW is the single tool I would carry on a tractor if I was limited to just one. No toolbox needed. Just clamp it on something round or hex shaped. It clamps securely on all round or hex shapes from 5/8 to 1-5/8 inch without marring, and will deliver extremely high torque to hex fasteners without slipping. Hold chisels or punches to keep your hand safe. Clamp it on a big bolt to make a hammer. Establish a temporary collar anyplace on a shaft without marring. Provide a steady rest point for something unwieldy that you must carry. Use the serrated tip of the jaw for small stuff. No worker on mechanics should be without one - even if youre not limited to one tool. ;)
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Kenneth
Date: July 31, 2021
This product is perfect for my splicing and activation job. I cannot perform without it!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jocelyn Raby
Date: July 22, 2021
Perfect. Just what I wanted.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
notsofunny
Date: June 06, 2021
Not a knock off. Absolute go to for stubborn nuts.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
dariomac13
Date: June 05, 2021
mine still made in the usa
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Baibat
Date: May 11, 2021
Work well, great for vehicle restoration work
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]