skip to footer block
NTP Hooker BH5412 Blackheart Cat Back Exhaust System P14766320NTP-H26BH5412 https://cdnimages.opentip.com/full/NTP/NTP-H26BH5412.jpg Hooker BH5412 Blackheart Cat Back Exhaust System Manufacturer Part Number: H26BH5412Blackheart Cat-Back Exhaust SystemPtoduct Info Blackheart Cat-Back Exhaust System Single 2.5 in. Lightweight Stainless Steel Tubing Incl. Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip High Clearance Design Features and Benefits 2.5 in. Lightweight 18 Gauge Mandrel Bent 304 Stainless Steel All Hardware Included Limited Lifetime Warranty Mid Mount Muffler Design Produces A Mild Healthy Exhaust Note Removes OEM Muffler Freeing Up Space/Removing Unwanted Weight High Tuck Design For The Most Demanding Off Road Conditions Max Dyno Gains Of 10 HP And 7.1 lb./ft. Torque Up To 48% Weight Savings Over OE Muffler A Savings Of 14 lbs. 100% Quality Hand-Welded Construction Utilizes OEM Mounting Points For Factory-Like Fitment Tube Geometry Designed For Hassle-Free Installation Product AttributesExhaust Type: Cat-BackExit Position: Single Straight Driver Side RearInlet Inside Diameter: 2.500 in.Material: Stainless SteelMuffler Body Length: No MufflerMuffler Type: High-Flow and Straight-ThroughTail Pipe Diameter: 2.500 in.Tip Diameter: 2.500 in.Tube Diameter: 2.500 in.Tubing Diameter: 2.500 in. Part Terminology LabelExhaust System KitAssociated Comments Holley Performance Emission Code 8: This product is engineered to facilitate the installation of a later modelemissions friendly engine into a vintage/classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply: If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A/The resulting vehicle is identical (with regard to all emissions related partsengine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis/The vehicle is a uncontrolled vehicle-Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles/An EO legal engine swap kit is utilized (such as a GM EROD)/The vehicle is being used for Competition Use Only-Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. NOTE: Consumers are responsible for complying with laws prohibiting tamperingand for ensuring that modified vehicles are operated in a manner that complies with applicable laws. 14766320 090127047880 53.4500lbs 9.50 20.50 42.00
Hooker
668.5900 2025-06-25 Only 2 left In Stock
  »  
  »  
  »  
  »  
  »  

Hooker BH5412 Blackheart Cat-Back Exhaust System

Brand Hooker
Shop more from NTP
UPC: 090127047880
SKU: NTP-H26BH5412
Price: $668.59
Quantity:
Only 2 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: H26BH5412

Blackheart Cat-Back Exhaust System

Ptoduct Info
  • Blackheart Cat-Back Exhaust System
  • Single 2.5 in. Lightweight Stainless Steel Tubing
  • Incl. Tubing/Muffler/Hardware/Angle-Cut Exhaust Tip
  • High Clearance Design


Features and Benefits
  • 2.5 in. Lightweight 18 Gauge Mandrel Bent 304 Stainless Steel
  • All Hardware Included
  • Limited Lifetime Warranty
  • Mid Mount Muffler Design Produces A Mild Healthy Exhaust Note
  • Removes OEM Muffler Freeing Up Space/Removing Unwanted Weight
  • High Tuck Design For The Most Demanding Off Road Conditions
  • Max Dyno Gains Of 10 HP And 7.1 lb./ft. Torque
  • Up To 48% Weight Savings Over OE Muffler
  • A Savings Of 14 lbs.
  • 100% Quality Hand-Welded Construction
  • Utilizes OEM Mounting Points For Factory-Like Fitment
  • Tube Geometry Designed For Hassle-Free Installation


Product Attributes
  • Exhaust Type: Cat-Back
  • Exit Position: Single Straight Driver Side Rear
  • Inlet Inside Diameter: 2.500 in.
  • Material: Stainless Steel
  • Muffler Body Length: No Muffler
  • Muffler Type: High-Flow and Straight-Through
  • Tail Pipe Diameter: 2.500 in.
  • Tip Diameter: 2.500 in.
  • Tube Diameter: 2.500 in.
  • Tubing Diameter: 2.500 in.


Part Terminology Label
Exhaust System Kit

Associated Comments
  • Holley Performance Emission Code 8: This product is engineered to facilitate the installation of a later model
  • emissions friendly engine into a vintage/classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply: If there is a reasonable basis for knowing that emissions are not adversely affected as described in EPA Memo 1A/The resulting vehicle is identical (with regard to all emissions related parts
  • engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis/The vehicle is a uncontrolled vehicle-Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles/An EO legal engine swap kit is utilized (such as a GM EROD)/The vehicle is being used for Competition Use Only-Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. NOTE: Consumers are responsible for complying with laws prohibiting tampering
  • and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review