skip to footer block
TOS Holland Electronics HOL QC1 RG6 QC Continuity Connectors 50 pc P7802775TOS-HOL-QC1 https://cdnimages.opentip.com/full/TOS/TOS-HOL-QC1.jpg Holland Electronics HOL QC1 RG6 QC Continuity Connectors 50 pc The QC Series Continuity Compression Connectors from Holland Electronics are ideally suited for both professional and consumer use. An advanced polymer compression system provides a secure 360 degree seal resulting in maximum RF shielding performance and a consistent fit with the cable. The one-piece connector body and nut design allows for unparalleled electrical and mechanical performance.Features:Designed for Standard and TriShield cables ensuring easy installation and solid performanceAdvanced polymer compression system provides 360 degree sealProvides shielding of up to -120 dB at CATV frequenciesStandard 1/4\" - 1/4\" cable preparationWorks with industry standard preparation and standard compression toolsWorks with all standard security sleeve and tightening devicesExceeds SCTE and Telcordia specificationsSpecifications:Quantity: 50Size: RG6Frequency Range: DC - 3 GHzShielding Effectiveness: > 100 dB (to 300 MHz) Spec: Telcordia GR-1503 3.5.5Shielding Effectiveness: > 90 dB (to 1 GHz)Insertion Loss (350 GHz): < .1 dB MaxInsertion Loss (700 GHz): < .2 dB MaxInsertion Loss (1 GHz): < .3 dB MaxReturn Loss (1GHz): > 20dB 7802775 1.1300lbs 0.00 0.00 0.00
Holland Electronics
18.7600 2026-04-26 In Stock
customer review - by , January 1, 2025
5/ 5stars
I just installed both of these on portable generators, and it is so much nicer than having little pigtails sticking out. They are supposed to be water-tight, but a little silicone sealant gave me a little more peace of mind. They were very simple to install. Especially if you have a 1/2" drill bit, which makes a perfect sized hole for these adapters. Simply find a good spot that has the necessary clearance, drill a 1/2" hole, insert and use the two self-tapping screws to secure it. Done. Now I can easily keep my generators on battery maintainers and simply unplug them when I need to use them. It looks nice and discreet too. I think the self-tapping screws could be a little shorter, but they don't stick out too far and the manufacturer is obviously going for something that works in a wide variety of applications. Just make sure the cables behind them aren't going to vibrate up against the sharp tips. You could always screw some kind of little caps on them or a dab of silicone, etc. I will likely be buying more of these in the future.
customer review - by , January 1, 2025
5/ 5stars
Thick wire, strong and easy to install and use. Can put this tipe plug on multiple things like lights and heaters in a boat or golf cart. Works great on my boat!!
customer review - by , January 1, 2025
5/ 5stars
I’ve installed these on my riding lawn mower and kayak to plug trickle chargers in and keep my batteries charged. More convenient than fishing for a lose connector under the seat. Plug fits in nice a snug so it doesn’t fall out, but still easy to plug and unplug. I plans to add another to my antique car as well. Recommend as a nice upgrade.
customer review - by , January 1, 2025
5/ 5stars
This plug in mount is perfect. I placed it just outside the heat deflector on my bike. I no longer have to tuck in or worry about my battery tender plug when I'm riding.
customer review - by , December 12, 2024
5/ 5stars
The product seems ok, but I had to cut the wire for my specific use and thats when it became obvious that this is NOT COPPER wiring. The aluminum wiring is probably ok for many purposes, but since they falsely advertised this as 100 copper when it's clearly not, they get 1 star.
customer review - by , December 12, 2024
5/ 5stars
I installed this on my Kawasaki Mule to keep the battery charged when I'm storing it. It was easy to install and works as intended. The plug is very tight, so I don't worry about it coming unplugged while using it.
customer review - by , October 10, 2024
4/ 5stars
I got these to install on my truck which rarely gets used. I placed it in this plastic cowl piece which is out of the way and it blends well. If I need or want to remove it the plastic piece it is installed in is readily available on ebay for about 20 dollars.
customer review - by , September 9, 2024
5/ 5stars
Used for cargo trailer to add solar power to it.
customer review - by , September 9, 2024
5/ 5stars
Installed this on my shed to keep the generator battery charged and the shed closed. I added one to the generator so I can remove it easily.
customer review - by , September 9, 2024
5/ 5stars
Moved to connector to the left side panel easier hookups for battery tender
  »  
  »  
  »  
  »  
  »  

Holland Electronics HOL-QC1 RG6 QC Continuity Connectors - 50 pc

stars Rating 5 | 89 reviews
Brand Holland Electronics
Shop more from TOS
SKU: TOS-HOL-QC1
Price:
$18.76Free shipping on orders over $75.00 on select TOS- items. Details
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with TOS-, and you can get free shipping for an order of over  $75.00  consisting of only TOS- series products.

Product Description

The QC Series Continuity Compression Connectors from Holland Electronics are ideally suited for both professional and consumer use. An advanced polymer compression system provides a secure 360 degree seal resulting in maximum RF shielding performance and a consistent fit with the cable. The one-piece connector body and nut design allows for unparalleled electrical and mechanical performance.

Features:
  • Designed for Standard and TriShield cables ensuring easy installation and solid performance
  • Advanced polymer compression system provides 360 degree seal
  • Provides shielding of up to -120 dB at CATV frequencies
  • Standard 1/4" - 1/4" cable preparation
  • Works with industry standard preparation and standard compression tools
  • Works with all standard security sleeve and tightening devices
  • Exceeds SCTE and Telcordia specifications

    • Specifications:
  • Quantity: 50
  • Size: RG6
  • Frequency Range: DC - 3 GHz
  • Shielding Effectiveness: > 100 dB (to 300 MHz) Spec: Telcordia GR-1503 3.5.5
  • Shielding Effectiveness: > 90 dB (to 1 GHz)
  • Insertion Loss (350 GHz): < .1 dB Max
  • Insertion Loss (700 GHz): < .2 dB Max
  • Insertion Loss (1 GHz): < .3 dB Max
  • Return Loss (1GHz): > 20dB

    • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item
    Request More Information

    Customer Reviews
    5 out of 5
    see all 89 reviews
    5 stars
    77
    4 stars
    5
    3 stars
    6
    2 stars
    0
    1 stars
    1
    Write a Review
    By W. Mitchell
    Date: January 27, 2025
    I just installed both of these on portable generators, and it is so much nicer than having little pigtails sticking out. They are supposed to be water-tight, but a little silicone sealant gave me a little more peace of mind. They were very simple to install. Especially if you have a 1/2" drill bit, which makes a perfect sized hole for these adapters. Simply find a good spot that has the necessary clearance, drill a 1/2" hole, insert and use the two self-tapping screws to secure it. Done. Now I can easily keep my generators on battery maintainers and simply unplug them when I need to use them. It looks nice and discreet too. I think the self-tapping screws could be a little shorter, but they don't stick out too far and the manufacturer is obviously going for something that works in a wide variety of applications. Just make sure the cables behind them aren't going to vibrate up against the sharp tips. You could always screw some kind of little caps on them or a dab of silicone, etc. I will likely be buying more of these in the future.
    Rating: 5 stars [5 of 5 Stars!]
    By R.N.L.
    Date: January 27, 2025
    Thick wire, strong and easy to install and use. Can put this tipe plug on multiple things like lights and heaters in a boat or golf cart. Works great on my boat!!
    Rating: 5 stars [5 of 5 Stars!]
    By David
    Date: January 11, 2025
    I’ve installed these on my riding lawn mower and kayak to plug trickle chargers in and keep my batteries charged. More convenient than fishing for a lose connector under the seat. Plug fits in nice a snug so it doesn’t fall out, but still easy to plug and unplug. I plans to add another to my antique car as well. Recommend as a nice upgrade.
    Rating: 5 stars [5 of 5 Stars!]
    By Scott
    Date: January 05, 2025
    This plug in mount is perfect. I placed it just outside the heat deflector on my bike. I no longer have to tuck in or worry about my battery tender plug when I'm riding.
    Rating: 5 stars [5 of 5 Stars!]
    By Jeremy
    Date: December 20, 2024
    The product seems ok, but I had to cut the wire for my specific use and thats when it became obvious that this is NOT COPPER wiring. The aluminum wiring is probably ok for many purposes, but since they falsely advertised this as 100 copper when it's clearly not, they get 1 star.
    Rating: 5 stars [5 of 5 Stars!]
    By Richard C. Cameron
    Date: December 02, 2024
    I installed this on my Kawasaki Mule to keep the battery charged when I'm storing it. It was easy to install and works as intended. The plug is very tight, so I don't worry about it coming unplugged while using it.
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 89 reviews
     1  2  3  4  5 ...  [Next]