0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: LW5004HR-N
The Dynavox LW5004HR-N offers advanced driver technology at an affordable price range. With a minimalistic cast aluminum frame, 3" voice coil, triple magnet system, and one-piece fiberglass honeycomb cone this 5-1/4" woofer is an amazing value.
Key Features:
Dynavox LW5004HR-N 5-1/4" Honeycomb Cone Woofer
With an amazing combination of value and technology, the LW5004HR-N is an obvious choice for use in high performance designs that won't break the bank. With smooth response from 57 to 3,500 Hz this woofer is perfect for use in 2-way systems, allowing easy transition to most tweeters.
Dynavox has packed a surprising amount of technology into the LW5004HR-N. To begin with, this driver uses a huge 3" voice coil on a vented aluminum former. The one-piece fiberglass honeycomb composite cone/dustcap is extremely light and rigid with great damping characteristics to produce natural response. The motor on this driver uses a triple magnet design in which the magnets are set inside the massive voice coil to maximize the magnetic force on the gap. In addition, the cast aluminum frame allows ample room for the rear of the driver to breathe along with extensive voice coil and motor venting.
The Dynavox LW5004HR-N offers advanced driver technology at an affordable price range. With a minimalistic cast aluminum frame, 3" voice coil, triple magnet system, and one-piece fiberglass honeycomb cone this 5-1/4" woofer is an amazing value.
Key Features:
- Extremely rigid fiberglass honeycomb cone moves breakup to over 5,000 Hz
- 3" copper clad aluminum voice coil wound on an aluminum former keeps excursion linear
- Extremely open frame design with extensive venting for low power compression
- Smooth response up to 3,500 Hz makes this driver perfect for 2-way designs
Dynavox LW5004HR-N 5-1/4" Honeycomb Cone Woofer
With an amazing combination of value and technology, the LW5004HR-N is an obvious choice for use in high performance designs that won't break the bank. With smooth response from 57 to 3,500 Hz this woofer is perfect for use in 2-way systems, allowing easy transition to most tweeters.
Dynavox has packed a surprising amount of technology into the LW5004HR-N. To begin with, this driver uses a huge 3" voice coil on a vented aluminum former. The one-piece fiberglass honeycomb composite cone/dustcap is extremely light and rigid with great damping characteristics to produce natural response. The motor on this driver uses a triple magnet design in which the magnets are set inside the massive voice coil to maximize the magnetic force on the gap. In addition, the cast aluminum frame allows ample room for the rear of the driver to breathe along with extensive voice coil and motor venting.
Product Details | |
|---|---|
| Brand | Dynavox |
| Model | LW5004HR-N |
| Part Number | 295-624 |
| UPC | 848864035994 |
| Unit of Measure | Each |
| Weight | 2.65 |
Product Specifications | |
|---|---|
| Nominal Diameter | 5-1/4" |
| Bolt Circle Diameter | 5.29 |
| Moving Mass Of Diaphragm (Mmd) | 10.84 |
| Power Handling (RMS) | 50 Watts |
| Power Handling (MAX) | 100 Watts |
| Impedance | 6Ω |
| Frequency Response | 57 to 3,500Hz |
| Sensitivity | 87.41dB 2.83V/1m |
| Voice Coil Diameter | 3" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 57.15Hz |
| DC Resistance (Re) | 5.3Ω |
| Voice Coil Inductance (Le) | 0.73mH |
| Mechanical Q (Qms) | 2.3 |
| Electromagnetic Q (Qes) | 0.64 |
| Total Q (Qts) | 0.5 |
| Compliance Equivalent Volume (Vas) | 0.27ft³ |
| BL Product (BL) | 5.678T·m |
| Maximum Linear Excursion (Xmax) | 2.45mm |
| Surface Area of Cone (Sd) | 88.23cm² |
Materials of Construction | |
|---|---|
| Cone Material | Fiberglass |
| Surround Material | Rubber |
| Voice Coil Wire Material | CCA |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 5.7" |
| Baffle Cutout Diameter | 4.88" |
| Depth | 2.64" |
| # Mounting Holes | 6 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.13ft³ |
| Sealed F3 | 97.5Hz |
| Vented Volume | 0.43ft³ |
| Vented F3 | 49.2Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category