Devcon Wear GuardTM High Load Product Details: Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8" Will not sag on overhead or vertical surfaces Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes 30-minute working time Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure | |
Specifications | |
Adhesive Tensile Shear | 1,474 psi |
Applicable Materials | Ceramic; Concrete; Most Metals |
Big Catalog Page# | 2012:175 |
Brand | DEVCON |
Capacity Vol. [Nom] | 30 lb |
Capacity Wt. [Nom] | 30 lb |
Chemical Compound | Epoxy |
Color | Grey |
Compressive Strength | 11,000 psi |
Country of Origin | US |
Dielectric Strength | 340 V/mil |
Full Cure Time @ Temp. | 8 h @ 75 °F |
Gap Fill [Nom] | 3/4 in |
Hardness [Nom] | 87 Shore D |
Hazmat | YES |
MPI Catalog | NO |
MPI Catalog Page# | 2021:59 |
ORMD | NO |
Packing Type | Kit |
Prop 65 | NO |
Resistance | Hydrochloric Acid-10%; Sulfuric Acid-10% |
Special Order | NO |
Stock Status | In Stock |
Temp. Range [Max] | 300 °F |
Tensile Strength [Nom] | 4,210 psi |
UNSPSC | 31201600 |
Working Time [Min] | 30 min |
Working Time [Nom] | 30 min |
Wt. | 30 lb |
NOTE: Country of Origin information is based on information provided by product manufacturers and other third parties. We have not independently verified this information and does not warrant its accuracy. | |
Download Safety Data Sheet |
Attention CA Residents: Prop 65 Warning