5 out of 5
Dayton Audio DS270-PR 10" Designer Series Passive Radiator
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: DS270-PR
The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction.
Dayton Audio DS270-PR 10" Designer Series Passive Radiator
The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems.
Specifications: Fs: 21.9 Hz Vas: 3.73 cu. ft. Qms: 3.98 Cms: 0.60 mm/N Rms: 3.1 kg/ Mms: 88.4 g Sd: 353 sq. cm. Xmax: 11 mm Dimensions: Overall diameter: 10.63", Cutout diameter: 8.94", Depth: 2.81".
Note: Adding mass to the passive radiator will decrease Fs and increase Qms.
Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 10" woofer/subwoofer that has 10mm of X-max would require 2-10" passive radiators with 10mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).
The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction.
Dayton Audio DS270-PR 10" Designer Series Passive Radiator
The Dayton Audio Passive Radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, the passives match the Shielded DVC line of subwoofers, with a poly coated paper cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from floor standing two-ways to small active/passive subwoofer systems.
Specifications: Fs: 21.9 Hz Vas: 3.73 cu. ft. Qms: 3.98 Cms: 0.60 mm/N Rms: 3.1 kg/ Mms: 88.4 g Sd: 353 sq. cm. Xmax: 11 mm Dimensions: Overall diameter: 10.63", Cutout diameter: 8.94", Depth: 2.81".
Note: Adding mass to the passive radiator will decrease Fs and increase Qms.
Tip: As a general rule the passive radiator(s) should be able to move double the volume of air as the active woofer(s)/subwoofer(s) in the system. For example: A passive radiator system for a 10" woofer/subwoofer that has 10mm of X-max would require 2-10" passive radiators with 10mm of X-max. For single passive radiator systems, it is common to use a passive that is larger than the active woofer(s)/subwoofer(s).
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DS270-PR |
| Part Number | 295-494 |
| UPC | 844632000409 |
| Unit of Measure | Each |
| Weight | 1.5 |
Product Specifications | |
|---|---|
| Nominal Diameter | 10" |
| Moving Mass Of Diaphragm (Mmd) | 88.4 |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 21.9Hz |
| Mechanical Q (Qms) | 3.98 |
| Compliance Equivalent Volume (Vas) | 3.73ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.6mm/N |
| Maximum Linear Excursion (Xmax) | 11mm |
| Surface Area of Cone (Sd) | 353cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper |
| Surround Material | Rubber |
| Basket / Frame Material | Steel |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 10.63" |
| Baffle Cutout Diameter | 8.94" |
| Depth | 2.87" |
| # Mounting Holes | 5 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Randy L.
Date: August 27, 2023
Works perfect.Thank you
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By ACE
Date: February 04, 2012
I purchased these to replace some old worn out radiators in my Realistic Optimus T110 speakers. I am not sure how well they would work with the original woofers. I replaced mine with the dayton RS225 woofers. The radiators operate without any noise. I added weight to mine and put a little gorilla glue to hold everything in place. They have held up so far to extreme low frequency with high power. I almost purchased the step up from dayton, but glad I went with these. They are very good. As with anything be sure to drill small holes in your cabinets before running screws in! Very happy with the purchase. (check out the dayton woofers on their website. awesome products!)
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 2 of 2 reviews
1