0 reviews
Be the first to review this item!
Dayton Audio DAEX32U-4 Ultra 32mm Exciter 20W 4 Ohm
Brand Dayton Audio
Shop more from PEX
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: DAEX32U-4
Turn large, rigid surfaces into speakers with the Dayton Audio DAEX32U-4 audio exciter. Includes pre-attached 3M VHB adhesive for maximum energy transfer, even on moving objects!
Key Features:
Dayton Audio DAEX32U-4 Ultra 32mm Exciter 20W 4 Ohm
Dayton Audio's DAEX32U-4 Ultra exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil makes it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 20 watts RMS VCdia: 32 mm Nominal impedance: 4 ohms Re: 3.5 ohms Le: 0.23 mH Fs: 160 Hz Dimensions: 2.625" (66 mm) overall diameter x 0.75" (19 mm) total height Adhesive dimensions: 1.64" (41.7 mm) outside diameter, 0.86" (21.7 mm) inside diameter Weight: 140 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Turn large, rigid surfaces into speakers with the Dayton Audio DAEX32U-4 audio exciter. Includes pre-attached 3M VHB adhesive for maximum energy transfer, even on moving objects!
Key Features:
- Heavy-duty design with a 32 mm voice coil for a high 20 watt RMS power handling
- Pre-applied 3M™ VHB™ adhesive for quick, secure installation
- Rare-earth neodymium motor and a proprietary two-layer voice coil
- 4 ohm impedance for use with small, Class D amplifiers
Dayton Audio DAEX32U-4 Ultra 32mm Exciter 20W 4 Ohm
Dayton Audio's DAEX32U-4 Ultra exciter is built to turn large, thick, rigid surfaces into speakers. The 32 mm voice coil makes it perfect for large glass panes, furniture, and surfaces that would normally resist the effects of an exciter.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small Class D audio amplifiers, without sacrificing total output.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body... just peel and stick! Two male spade quick-disconnect terminals are built onto the main body for quick electrical connection.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 20 watts RMS VCdia: 32 mm Nominal impedance: 4 ohms Re: 3.5 ohms Le: 0.23 mH Fs: 160 Hz Dimensions: 2.625" (66 mm) overall diameter x 0.75" (19 mm) total height Adhesive dimensions: 1.64" (41.7 mm) outside diameter, 0.86" (21.7 mm) inside diameter Weight: 140 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX32U-4 |
| Part Number | 295-235 |
| UPC | 848791001925 |
| Unit of Measure | Each |
| Weight | 0.35 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 20 Watts |
| Impedance | 4Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category