skip to footer block
JEN Jensen Swing SH168 12mm Bolt & Nut For Ductile Iron Swing Hangers P5929559JEN-SH168 https://cdnimages.opentip.com/full/JEN/JEN-SH168.jpg Jensen Swing SH168 12mm Bolt & Nut For Ductile Iron Swing Hangers This is a replacement steel 12mm Bolt & Nut to be used in both ductile iron and stamped steel hangers. The bolt is 2 1/2\" long with 1\" threaded. The overall length of both the nut and bolt is 2 7/8\". This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.This is for children 0 - 12 years old only. Adults should supervise children at all times. Do not allow children to use unsafely. Do not allow it to be used if damaged.IMPORTANT: Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Our website also has a \"Product Testing Information\" page. All products are tested for lead, phthalates and tensile strength. Installation: Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions.Use this bolt and nut to assemble pendulum to swing hangers, if old bolt or nut is worn, damaged or missing. Make sure that when you place bolt back through bushing in pendulum that the nut is reattached snugly. After tightening, the threads should not be showing more than two threads past the nut.Maintenance: At beginning and end of each play season and once a month during play season, check for sharp edges and/or cracks in hanger, paying particular attention to surface around bolt holes. Check to see if oil lite bearing in swing hanger pendulum is worn or cracking. When worn or cracked, replace pendulum. Check for vandalism. Replace parts if necessary. Check to make sure lock nuts are tight. Maintain detailed inspection and maintenance records for public-use playground equipment.Any damage from vandalism, abuse or misuse VOIDS all warranties. Weight (lbs) 0.15 Dimensions (in) 9 X 6 X 2 in 5929559 4.0000lbs 2.00 6.00 9.00
Jensen Swing
3.5400 2025-04-25 3029 In Stock

Jensen Swing SH168 - 12mm Bolt & Nut- For Ductile Iron Swing Hangers

Brand Jensen Swing
Shop more from JEN

SKU: JEN-SH168
Price: $3.54
Quantity:
Shipping:
$17.63 To [ 43215 ] Estimated Delivery Date: May 2, 2024 to May 6, 2024
3029 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

This is a replacement steel 12mm Bolt & Nut to be used in both ductile iron and stamped steel hangers. The bolt is 2 1/2" long with 1" threaded. The overall length of both the nut and bolt is 2 7/8". This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.

This is for children 0 - 12 years old only. Adults should supervise children at all times. Do not allow children to use unsafely. Do not allow it to be used if damaged.

IMPORTANT: Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Our website also has a "Product Testing Information" page. All products are tested for lead, phthalates and tensile strength.

Installation: Our parts are sold as either replacement parts or components of a set, unless you are buying our Metal Frame Set, therefore these parts need to be installed according to the sets installation instructions.

Use this bolt and nut to assemble pendulum to swing hangers, if old bolt or nut is worn, damaged or missing. Make sure that when you place bolt back through bushing in pendulum that the nut is reattached snugly. After tightening, the threads should not be showing more than two threads past the nut.

Maintenance: At beginning and end of each play season and once a month during play season, check for sharp edges and/or cracks in hanger, paying particular attention to surface around bolt holes. Check to see if oil lite bearing in swing hanger pendulum is worn or cracking. When worn or cracked, replace pendulum. Check for vandalism. Replace parts if necessary. Check to make sure lock nuts are tight. Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse or misuse VOIDS all warranties.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!