5 out of 5
Product Description
This Pentek IC-101L in-line filter is suitable for reduction of chlorine taste and odor and other unwanted tastes and odors. It has a polypropylene housing for dimensional stability and resistance to chemicals, and a coconut shell granular activated carbon filtering medium. It measures 10-1/2 x 2 inches (H x W). It has 1/4" female National Pipe Taper (NPT) threaded inlet and outlet ports, and its estimated lifespan is 2,500 gallons. This in-line filter causes an initial pressure drop of 10 pounds per square inch (psi) at 0.5 gallons per minute (gpm) and operates at a maximum temperature of 100 degrees F (37.8 degrees C). It is tested and certified by the National Sanitation Foundation (NSF), and is suitable for residential and commercial drinking water filtration.
Specifications
Initial pressure drop at 0.5 gpm 10 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Dimensions* 9-3/4 x 4-1/2 inches/248 x 114mm (H x W)
Recommended flow rate 0.75 gpm
Standards met NSF tested and certified
*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Specifications
Initial pressure drop at 0.5 gpm 10 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Dimensions* 9-3/4 x 4-1/2 inches/248 x 114mm (H x W)
Recommended flow rate 0.75 gpm
Standards met NSF tested and certified
*H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems under the Pentek brand. The company, founded in 1966 and headquartered in Schaffhausen, Switzerland, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By paras shah
Date: June 17, 2017
perfect!
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By cash 71
Date: January 15, 2017
Great replacement for the Culligan 101.Which it came with a clip for attachment.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By A Customer
Date: September 19, 2016
Good filter, I use it as a post RO membrane water filter, been using it for few years, I replace it once a year, never had a problem with it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Shawn O.
Date: August 02, 2016
Fits and works! Water tastes great!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By FastHackem
Date: January 26, 2016
Works exactly as intended. I purchased 1/4" quick connect fittings at my local L0wes hardware. This was used as a pre-filter to my ion-exchange resin chamber to fill my 55 gallon fish tank with tap water. After filling the tank, I connected this to my refrigerator as a 1st stage addition to the internal filter it has.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 5 of 5 reviews
1