0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: M-PAS-CABLE-6
Included in the PA-9 Power-All System and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
Cable-Grey is 158.75 mm (approximately 5.25 inches) in length from plug to plug.
NOTE: The Power-All Cable-Grey was designed to hook directly to the battery snap inside a pedal and then provide power to the pedal using an external DC power adaptor. The wiring of the Cable-Grey's battery snap is the OPPOSITE of what would normally be needed to connect to a 9-Volt battery. In other words, the small connecting post carries positive (to connect to the larger, positive post on the pedal's battery snap) and the larger connecting post carries negative (to connect to the smaller, negative post on the pedal's battery snap).
Whether you're using the Power-All digital Power Supply or another manufacturers' multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
Measurements and Specs
Included in the PA-9 Power-All System and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
Cable-Grey is 158.75 mm (approximately 5.25 inches) in length from plug to plug.
NOTE: The Power-All Cable-Grey was designed to hook directly to the battery snap inside a pedal and then provide power to the pedal using an external DC power adaptor. The wiring of the Cable-Grey's battery snap is the OPPOSITE of what would normally be needed to connect to a 9-Volt battery. In other words, the small connecting post carries positive (to connect to the larger, positive post on the pedal's battery snap) and the larger connecting post carries negative (to connect to the smaller, negative post on the pedal's battery snap).
Whether you're using the Power-All digital Power Supply or another manufacturers' multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
Measurements and Specs
| Cable Length | 5.25 in. between plugs | |
| Cable Size | 26 gauge |
| Packaging Dimensions | 3.085 in. × 2.5 in. × 0.475 in. | |
| Weight (Packaging) | 0.032 lbs. |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Shipping Restrictions
This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category