skip to footer block
PEX miniDSP 2x4 Kit Digital Signal Processor Assembled Board P8585071PEX-230-322 https://cdnimages.opentip.com/full/PEX/PEX-230-322.jpg miniDSP 2x4 Kit Digital Signal Processor Assembled Board Manufacturer Part Number: miniDSP 2x4 KitThe miniDSP 2x4 kit is a flexible, pocket size DSP board with 2 x analog IN and 4 x analog OUT, perfect for the DIY audio enthusiast. Combined with plug-in software for programming, you can configure the on board audio processing filters in real time from a PC or Mac computer.Key Features: Plug and play USB driver and real time software configuration using miniDSP plug-ins Device does not required a PC once configured USB powered and a wide range of DC power options Unbalanced inputs switchable with a jumper Nichicon Muse audiophile capacitors miniDSP 2x4 Kit Digital Signal Processor Assembled BoardThe miniDSP 2x4 kit is a low cost, low power DIY Digital Signal Processor (DSP) board with two analog inputs and four analog outputs. Typically connected between your analog source and a multi-channel amplifier, this pocket size module packs all the filter tools you need to get started with tuning your 2 way or 4 way subwoofer.At the core of the miniDSP 2x4 kit solution is the combination of intelligent onboard firmware combined with the miniDSP flexible software plug-in. May it be a PC or Mac, the first step will involve programming the device over the driverless USB 2.0 port. Using the onboard Digital Signal Processor (DSP), you can configure the onboard parametric/graphic equalizers (PEQ), crossovers, levels and time alignment in real time. All settings are automatically stored and reloaded at boot up.Software plug-in (sold separately):Specifications Digital signal processor engine: 28/56 bit Sample rate: 48 kHz ADC/DAC data resolution: 24 bits Analog audio input/output: Unbalanced RCA Maximum input level: 0.9Vrms, 2Vrms Dynamic range un-weighted: >98 dB Input impedance: 20 K ohms Maximum level, unbalanced: 0.9Vrms (2.5Vpp) Output impedance: 560 ohms Power supply: Powered from USB cable, 4.5-24 VDC input via DC 2.1mm round connector Current requirement: 5 VCD, 150mA Dimensions: 2.95\" x 2.95\".Product Details BrandminiDSP ModelminiDSP 2x4 Kit Part Number230-322 UPC848864032894 Unit of MeasureEach Weight0.45 8585071 848864032894 0.5400lbs 0.00 0.00 0.00
miniDSP
112.2000 2026-11-25 Out of Stock

miniDSP 2x4 Kit Digital Signal Processor Assembled Board

Brand miniDSP
Shop more from PEX

UPC: 848864032894
SKU: PEX-230-322
Price:
$112.20Free shipping on orders over $129.00 on select PEX- items. Details
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

Manufacturer Part Number: miniDSP 2x4 Kit

The miniDSP 2x4 kit is a flexible, pocket size DSP board with 2 x analog IN and 4 x analog OUT, perfect for the DIY audio enthusiast. Combined with plug-in software for programming, you can configure the on board audio processing filters in real time from a PC or Mac computer.

Key Features:
  • Plug and play USB driver and real time software configuration using miniDSP plug-ins
  • Device does not required a PC once configured
  • USB powered and a wide range of DC power options
  • Unbalanced inputs switchable with a jumper
  • Nichicon Muse audiophile capacitors


miniDSP 2x4 Kit Digital Signal Processor Assembled Board

The miniDSP 2x4 kit is a low cost, low power DIY Digital Signal Processor (DSP) board with two analog inputs and four analog outputs. Typically connected between your analog source and a multi-channel amplifier, this pocket size module packs all the filter tools you need to get started with tuning your 2 way or 4 way subwoofer.

At the core of the miniDSP 2x4 kit solution is the combination of intelligent onboard firmware combined with the miniDSP flexible software plug-in. May it be a PC or Mac, the first step will involve programming the device over the driverless USB 2.0 port. Using the onboard Digital Signal Processor (DSP), you can configure the onboard parametric/graphic equalizers (PEQ), crossovers, levels and time alignment in real time. All settings are automatically stored and reloaded at boot up.

Software plug-in (sold separately):

Specifications Digital signal processor engine: 28/56 bit Sample rate: 48 kHz ADC/DAC data resolution: 24 bits Analog audio input/output: Unbalanced RCA Maximum input level: 0.9Vrms, 2Vrms Dynamic range un-weighted: >98 dB Input impedance: 20 K ohms Maximum level, unbalanced: 0.9Vrms (2.5Vpp) Output impedance: 560 ohms Power supply: Powered from USB cable, 4.5-24 VDC input via DC 2.1mm round connector Current requirement: 5 VCD, 150mA Dimensions: 2.95" x 2.95".

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

This item is non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!