skip to footer block
TOS Vanco SPOTFD1 Spot for Dot P10944209TOS-VAN-SPOTFD1 https://cdnimages.opentip.com/full/TOS/TOS-VAN-SPOTFD1.jpg Vanco SPOTFD1 Spot for Dot Manufacturer part number: VAN-SPOTFD1Spot For Dot is a wall mount station for the Amazon Echo Dot (2nd generation) with a built in 80-watt amplifier to deliver music and information amplified to any set of speakers. The unique design also allows audio input from a variable line level source, such as a phone, tablet or TV (headphone or variable audio output) to be connected and played through the amplifier to almost any kind ofspeaker(s). Perfect for a 2 channel setup with Alexa voice control available at any time. For a clean look with no wiring exposed, the Spot For Dot is a great solution. Include one in every room for wirelessdistributed audio! Spot For Dot mounts within a standard 2x4 stud wall at least 35/8\" depth, and can be tapped into the main electrical wiring for a seamless appearance.Vanco International recommends that you use a professional electrician to install the Spot for Dot due to the power requirements.Features:An amplified in-wall solution that powers and is controlled by the Amazon Echo DotEncloses and flush mounts the Amazon Echo DotCan be used with almost any in-wall, in-ceiling, or in-room speaker25 Watts x 2 Channels 8 Ohm40 Watts x 2 Channels 4 Ohm110-240 V 50/60HzCan support up to 4 speakers being connected through a single ampAux line in from any audio source such as a TVWhite and almond faceplates includedAmazon Echo Dot (2nd generation) sold separatelyAmp:Amp Power Output: 25W x 2 (RMS @ 8Ω), 40W x 2 (RMS @ 4Ω)Speaker Terminal: 4-Pin Screw Terminal ConnectorVariable Audio Input: 3.5mm Stereo JackAudio Input Formats: AnalogTotal Harmonic Distortion (THD): Less than 1%Signal to Noise: Dot input 91db AUX input 101dbFrequency Response: 20-20khz +- 1dbAdjustable Volume: Fixed (requires variable audio source)Line Level Input Sensitivity: Dot - 410mV, AUX - 652mVPower:Amperage: 15aVoltage: 110v-240vCertifications: ETL, cETL, CE, FCC, PSE, RCM, & RoHSTermination: 3-Wire Screw downGrounding: YesSpecifications:Dimension (WxDxH): 5\" x 5\" x 4\"Weight: 1.31 lbsKit Includes:Spot For DotManualFactory Reset ToolCut-out TemplateClick Here to view the Spot for Dot Installation Guide 10944209 741835110723 2.4000lbs 0.00 0.00 0.00
Vanco International
154.1000 2025-05-12 In Stock
  »  
  »  
  »  
  »  
  »  
  »  

Vanco SPOTFD1 Spot for Dot

Brand Vanco International
Shop more from TOS
UPC: 741835110723
SKU: TOS-VAN-SPOTFD1
Price:
$154.10& this item ships for FREE Shipping. Details
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with TOS-, and you can get free shipping for an order of over  $75.00  consisting of only TOS- series products.

Product Description

Free Shipping Promotion
This item qualifies for free shipping within US 48 states. Details.

Manufacturer part number: VAN-SPOTFD1

Spot For Dot is a wall mount station for the Amazon Echo Dot (2nd generation) with a built in 80-watt amplifier to deliver music and information amplified to any set of speakers. The unique design also allows audio input from a variable line level source, such as a phone, tablet or TV (headphone or variable audio output) to be connected and played through the amplifier to almost any kind ofspeaker(s). Perfect for a 2 channel setup with Alexa voice control available at any time. For a clean look with no wiring exposed, the Spot For Dot is a great solution. Include one in every room for wirelessdistributed audio! Spot For Dot mounts within a standard 2x4 stud wall at least 35/8" depth, and can be tapped into the main electrical wiring for a seamless appearance.

Vanco International recommends that you use a professional electrician to install the Spot for Dot due to the power requirements.

Features:
  • An amplified in-wall solution that powers and is controlled by the Amazon Echo Dot
  • Encloses and flush mounts the Amazon Echo Dot
  • Can be used with almost any in-wall, in-ceiling, or in-room speaker
  • 25 Watts x 2 Channels 8 Ohm
  • 40 Watts x 2 Channels 4 Ohm
  • 110-240 V 50/60Hz
  • Can support up to 4 speakers being connected through a single amp
  • Aux line in from any audio source such as a TV
  • White and almond faceplates included
  • Amazon Echo Dot (2nd generation) sold separately

    • Amp:
  • Amp Power Output: 25W x 2 (RMS @ 8Ω), 40W x 2 (RMS @ 4Ω)
  • Speaker Terminal: 4-Pin Screw Terminal Connector
  • Variable Audio Input: 3.5mm Stereo Jack
  • Audio Input Formats: Analog
  • Total Harmonic Distortion (THD): Less than 1%
  • Signal to Noise: Dot input 91db AUX input 101db
  • Frequency Response: 20-20khz +- 1db
  • Adjustable Volume: Fixed (requires variable audio source)
  • Line Level Input Sensitivity: Dot - 410mV, AUX - 652mV

    • Power:
  • Amperage: 15a
  • Voltage: 110v-240v
  • Certifications: ETL, cETL, CE, FCC, PSE, RCM, & RoHS
  • Termination: 3-Wire Screw down
  • Grounding: Yes

    • Specifications:
  • Dimension (WxDxH): 5" x 5" x 4"
  • Weight: 1.31 lbs

    • Kit Includes:
  • Spot For Dot
  • Manual
  • Factory Reset Tool
  • Cut-out Template


    • Click Here to view the Spot for Dot Installation Guide

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Note

    This product is not eligible for coupon code discount, for we've been offering the best price in the market.
    Need more information?
    Our staff are available to answer any questions you may have about this item
    Request More Information

    Customer Reviews
    0 reviews
    Be the first to review this item!
    Write a Review