skip to footer block
MIS Sunex 7793B Jack 1000 Lb Telescopic Trans P3624002MIS-SU7793B https://cdnimages.opentip.com/full/MIS/MIS-SU7793B.jpg Sunex 7793B Jack 1000 Lb Telescopic Trans Transmission Jack Base Length 21.3 Inch Base Width 35 Inch Load Rating 1000 Pound Low Height 35 Inch High Height 74.2 Inch Saddle Tilt Fore And Aft 43 Degree By 24 Degree Saddle Tilt Side To Side 10 Degree, -28 DegreeFeatures / Benefits Use for removal, installation and transporting of transmissions and transfer cases on vehicles that are supported by lifts Foot activated pump pedal for hands free raising of the rams Lowered telescopic rams enable the transmission to be transferred from the jack to the work table and extended to reach a maximum height of 74 Foot activated release pedal provides slow controlled lowering of load Universal saddle with angle brackets that can be adjusted to the transmission pan configuration Chain tie down secures the load to the saddle Overload valve prevents jack from being used beyond its rated capacity Part Number: 7793BUNSPSC: 24101612 Specification Order Part Number SU7793B Item Desc JACK 1000 LB TELESCOPIC TRANS MANUFACTURER LONG NAME Sunex Tools ADDITIONAL INFORMATION Low Height 35 Inch; High Height 74.2 Inch; Saddle Tilt Fore and Aft 43 Degree By 24 Degree; Saddle Tilt Side To Side 10 Degree, -28 Degree MANUFACTURER PART NUMBER 7793B Product Group Id SU00 Country of Origin CN Harmonization Code 84254200 Bin Code GC031 Default Selling Unit EA Catalog Pages(s) 3624002 613364061794 167.6000lbs 0.00 0.00 0.00
Sunex
1000.4300 2025-04-29 Only 2 left In Stock
customer review - by , March 3, 2023
5/ 5stars
Really worth every penny. I should hand bought 2 years ago when it was $100 less
customer review - by , January 1, 2023
5/ 5stars
Bought this back in 2019. Why we are not a commercial shop, we do a lot of car repairs and race car builds and this has paid for itself many times over. We use it not only for transmissions, but for dropping/installing fuel tanks, subframes, exhaust systems and even to pick up the suspension corners when torquing rubber bushings. The tie down chains are a little cheesy, but do the job. Other wise the unit is very, very solid. With no weight, lowering the cylinder can be slow, but not a big deal. It has been 100 reliable. Too bad the price has literally doubled since 2019 so I would say it is not as good of a value as it used to be. In fact you can get a pneumatic version for about the same money now, go figure.
customer review - by , December 12, 2022
4/ 5stars
Good news is it's together and came with all of its parts. It came in a crate on a pallet, so that was all great. My frustration is that the main 4 bolts that fasten the legs to the jack, were extremely difficult to thread. I actually, had to sand/grind slightly taper the bolts to get them to start without cross threading.I haven't been able to put the jack under a load yet, but everything else seems to work as advertised.
customer review - by , May 5, 2022
5/ 5stars
Seems to be very stout haven't used it yet. But I assembled it. It's very heavy built nice casters with a good stance. I don't see having any problems with it.
customer review - by , May 5, 2022
5/ 5stars
Seems to be very stout haven't used it yet. But I assembled it. It's very heavy built nice casters with a good stance. I don't see having any problems with it.
customer review - by , April 4, 2022
5/ 5stars
We replaced one of our worn out jacks with this one and I can not stress enough how much easier installing transmission is with this product. The full tilt design made install a one man job. Assembly was very simple. Great quality product from a professionals point of view...
customer review - by , April 4, 2022
5/ 5stars
Have not used yet. Jack appears like it will do the job.Delivery was quick.Box was clearly dropped at least once. One side of box was missing. That side was taped! See photo of what box looked like at delivery
customer review - by , January 1, 2022
5/ 5stars
Solid jack at a good price point. Overbuilt and stout for less money than otc or other truck bought jacks
customer review - by , November 11, 2021
5/ 5stars
I purchased this jack to remove a 1950s Hydramatic, which is a very heavy car transmission. The jack worked very well and was extremely stable while bearing the weight of the transmission at nearly full extension. The foot pedals for raising and lowering the jack along with the two axis tilt adjustment of the tray are a huge plus when having to finesse the tailshaft out from an old GM x-framed car. Given the potential for damage and/or injury while removing a transmssion, the extra expense of this jack versus the many others that are a couple hundred cheaper seemed like money well spent.
customer review - by , October 10, 2021
5/ 5stars
THANK YOU
  »  
  »  
  »  
  »  
  »  

Sunex 7793B Jack 1000 Lb Telescopic Trans, Price/EACH

stars Rating 5 | 23 reviews
Brand Sunex
Shop more from MIS
UPC: 613364061794
SKU: MIS-SU7793B
Price: $1,000.43
Quantity:
Only 2 left In Stock
*  Shipping Note: Usually ships within 1 to 2 weeks.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EACH.

  • Transmission Jack
  • Base Length 21.3 Inch
  • Base Width 35 Inch
  • Load Rating 1000 Pound
  • Low Height 35 Inch
  • High Height 74.2 Inch
  • Saddle Tilt Fore And Aft 43 Degree By 24 Degree
  • Saddle Tilt Side To Side 10 Degree, -28 Degree


Features / Benefits
  • Use for removal, installation and transporting of transmissions and transfer cases on vehicles that are supported by lifts
  • Foot activated pump pedal for hands free raising of the rams
  • Lowered telescopic rams enable the transmission to be transferred from the jack to the work table and extended to reach a maximum height of 74
  • Foot activated release pedal provides slow controlled lowering of load
  • Universal saddle with angle brackets that can be adjusted to the transmission pan configuration
  • Chain tie down secures the load to the saddle
  • Overload valve prevents jack from being used beyond its rated capacity


Part Number: 7793B

UNSPSC: 24101612


Specification





This item is overweight. we may contact you when we process the order.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

Most Air and Power tools have a 90 days to one year warranty. Hand Tools are usually lifetime-abuse voids warranty.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 23 reviews
5 stars
22
4 stars
1
3 stars
0
2 stars
0
1 stars
0
Write a Review
By Joshua J Bloys
Date: March 29, 2023
Really worth every penny. I should hand bought 2 years ago when it was $100 less
Rating: 5 stars [5 of 5 Stars!]
By Don Kuehl
Date: January 24, 2023
Bought this back in 2019. Why we are not a commercial shop, we do a lot of car repairs and race car builds and this has paid for itself many times over. We use it not only for transmissions, but for dropping/installing fuel tanks, subframes, exhaust systems and even to pick up the suspension corners when torquing rubber bushings. The tie down chains are a little cheesy, but do the job. Other wise the unit is very, very solid. With no weight, lowering the cylinder can be slow, but not a big deal. It has been 100 reliable. Too bad the price has literally doubled since 2019 so I would say it is not as good of a value as it used to be. In fact you can get a pneumatic version for about the same money now, go figure.
Rating: 5 stars [5 of 5 Stars!]
By D. XoXo
Date: December 14, 2022
Good news is it's together and came with all of its parts. It came in a crate on a pallet, so that was all great. My frustration is that the main 4 bolts that fasten the legs to the jack, were extremely difficult to thread. I actually, had to sand/grind slightly taper the bolts to get them to start without cross threading.I haven't been able to put the jack under a load yet, but everything else seems to work as advertised.
Rating: 4 stars [4 of 5 Stars!]
By A Customer
Date: May 21, 2022
Seems to be very stout haven't used it yet. But I assembled it. It's very heavy built nice casters with a good stance. I don't see having any problems with it.
Rating: 5 stars [5 of 5 Stars!]
By Edward Lacy
Date: May 21, 2022
Seems to be very stout haven't used it yet. But I assembled it. It's very heavy built nice casters with a good stance. I don't see having any problems with it.
Rating: 5 stars [5 of 5 Stars!]
By Lauren A Ayala
Date: April 29, 2022
We replaced one of our worn out jacks with this one and I can not stress enough how much easier installing transmission is with this product. The full tilt design made install a one man job. Assembly was very simple. Great quality product from a professionals point of view...
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 23 reviews
 1  2  3  4  [Next]