skip to footer block
SAD Snap Tite Escutcheons ST197001 Escutcheon Handrail Snap Tite White 2Pcs P13882013SAD-ST197001 https://cdnimages.opentip.com/full/SAD/SAD-ST197001.jpg Snap Tite Escutcheons ST197001 Escutcheon Handrail Snap Tite White 2Pcs Manufacturer Part Number: ST197001Escutcheon, Handrail, Snap-Tite, White (2Pcs)Where installations are a snap!The Snap-Tite 2-piece escutcheon is made of high density plastic. This unique escutcheon is intended for use with 1.90 OD tube/rail. The 5\" diameter of the plate covers most mounting anchors/points.Additional Information-2-Piece Snap-Tite Escutcheon is Made of High Density Plastic.-Measures 1.90\" OD-Used on handrails and jetsAlternate Part Numbers ST1970WH 13882013 0.4800lbs 0.00 0.00 0.00
Snap-Tite Escutcheons
10.7100 2025-04-27 13 In Stock
customer review - by , January 1, 2023
4/ 5stars
Good product for the money. Wished it came with the screws. Looks alright as well.
customer review - by , December 12, 2022
4/ 5stars
No screws came with the product. Otherwise they look nice.
customer review - by , November 11, 2022
4/ 5stars
The manufacturer or seller shows that the internal diameter of the hole is 5/8 when in fact it is 7/8. I measured the hose connection in our toilet and it was 1/2 so as this is advertised as fitting a 1/2 pipe I ordered the set.Yes it does go around the 1/2 pipe/hose, but it is not a secure fit. It is loose as there is still 3/8 left of this plate so consequently, it is loose as goose. It does not fit securely to the pipe nor to the wall so I will have to figure out a way of using a double sided tape to secure to the wall. But still, it will fit loosely over the hose. Not good as this leaves room for insects to crawl to this space (I had to stuff some bubble wrap into the hole as I did not have any steel wool).If it is advertised as fitting a 1/2 pipe/hose, should we not expect it to fit snugly covering the whole firmly up against the wall? I thought so. Also, this is a very small plate only measuring 3 7/8 wide.Yes it is nice and shiny and it is split like I wanted it but it hanging loosely is a bummer.
customer review - by , September 9, 2022
5/ 5stars
Easy to install. Great replacement to replace that rusted flange.
customer review - by , September 9, 2022
5/ 5stars
customer review - by , September 9, 2022
5/ 5stars
Exact fit and shiny
customer review - by , January 1, 2022
5/ 5stars
Decent,good bulk price.
customer review - by , November 11, 2021
5/ 5stars
I was under the impression that the product was chrome plated stainless steel. It wasn't, but the finish is very good.

Snap-Tite Escutcheons ST197001 Escutcheon, Handrail, Snap-Tite, White (2Pcs)

stars Rating 5 | 8 reviews
Shop more from SAD

SKU: SAD-ST197001
Price: $10.71
Quantity:
13 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: ST197001

Escutcheon, Handrail, Snap-Tite, White (2Pcs)

Where installations are a snap!

The Snap-Tite 2-piece escutcheon is made of high density plastic. This unique escutcheon is intended for use with 1.90 OD tube/rail. The 5" diameter of the plate covers most mounting anchors/points.

Additional Information


-2-Piece Snap-Tite Escutcheon is Made of High Density Plastic.

-Measures 1.90" OD

-Used on handrails and jets

Alternate Part Numbers





  • ST1970WH

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

All SAD- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 out of 5
5 stars
5
4 stars
3
3 stars
0
2 stars
0
1 stars
0
By Gaurav Gupta
Date: January 10, 2023
Good product for the money. Wished it came with the screws. Looks alright as well.
Rating: 4 stars [4 of 5 Stars!]
By Sean
Date: December 23, 2022
No screws came with the product. Otherwise they look nice.
Rating: 4 stars [4 of 5 Stars!]
By lucky
Date: November 18, 2022
The manufacturer or seller shows that the internal diameter of the hole is 5/8 when in fact it is 7/8. I measured the hose connection in our toilet and it was 1/2 so as this is advertised as fitting a 1/2 pipe I ordered the set.Yes it does go around the 1/2 pipe/hose, but it is not a secure fit. It is loose as there is still 3/8 left of this plate so consequently, it is loose as goose. It does not fit securely to the pipe nor to the wall so I will have to figure out a way of using a double sided tape to secure to the wall. But still, it will fit loosely over the hose. Not good as this leaves room for insects to crawl to this space (I had to stuff some bubble wrap into the hole as I did not have any steel wool).If it is advertised as fitting a 1/2 pipe/hose, should we not expect it to fit snugly covering the whole firmly up against the wall? I thought so. Also, this is a very small plate only measuring 3 7/8 wide.Yes it is nice and shiny and it is split like I wanted it but it hanging loosely is a bummer.
Rating: 4 stars [4 of 5 Stars!]
By Brett
Date: September 21, 2022
Easy to install. Great replacement to replace that rusted flange.
Rating: 5 stars [5 of 5 Stars!]
By Kelly
Date: September 07, 2022
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: September 05, 2022
Exact fit and shiny
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 8 reviews
 1  2  [Next]