0 reviews
Be the first to review this item!
Pyle PCM30A 30W PA Mixer-Amplifier with 25V & 70V Outputs
Brand Pyle Audio
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: PCM30A
Pyle's PCM30A power amplifier offers you the power, versatility, and wide frequency response to handle the amplification of music and voice you need in a professional sound system.
Key Features:
Overview:
Pyle PCM30A 30W PA Mixer-Amplifier with 25V & 70V Outputs
Pyle's PCM30A 30 watt power amplifier provides the juice you need for your 25V or 70V PA speaker system. Connect up two mics using the rear terminals, plus an auxiliary RCA input. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders.
The rear barrier strip offers a wide array of speaker output options. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Rounding out the capabilities of this amp is the Music-On-Hold function, replaceable fuse, and detachable AC power input. Runs on 110 or 220 V.
The wide range of paging and talkover functions make this amplifier perfect for meeting halls, auditoriums, small restaurants, and schools. If you're looking for great sound with the ability to deliver messages when needed, this is the amp for you.
Specifications:
Output power: 30 watts x 1 RMS, 60 watts max
Frequency response (±3 dB): 50 Hz to 15 kHz
THD (at rated output power): 1% or less at 1 kHz
Signal to Noise Ratio (A-weighted):
Mic: 55 dB
Aux: 70 dB
Tel: 60 dB
Input impedance:
Aux: 200 mV, 50kΩ, unbalanced
Mic 1/Mic 2: 1 mV, 600Ω, balanced
Tel/Page: 100 mV, 600Ω, balanced
Speaker outputs: 4Ω, 8Ω, 16Ω; 25V and 70V line
Monitor (MOH) output: 600Ω 1V and 8Ω 1W
Mute level (Aux/Mic 2): 40 dB
Tone controls (±10 dB):
Bass: 100 Hz
Treble: 10 kHz
Power requirement: 120/230 VAC, 60/50 Hz
Dimensions: 10.7" W x 3.46" H x 8.86" D (272 x 88 x 225 mm)
Net weight: 9.79 lbs.
Audio distribution systems, especially those commonly used in department stores, warehouses, restaurants, etc., require that many loudspeakers be driven from a single audio amplifier over long runs of speaker wire. The "constant voltage" or "high impedance distribution" audio systems can be complex to understand at first, however, provides many advantages. Learn how to design your own 70-volt or 25-volt loudspeaker system.
Specification:
Manuals & Resources:
Pyle's PCM30A power amplifier offers you the power, versatility, and wide frequency response to handle the amplification of music and voice you need in a professional sound system.
Key Features:
- Bass and treble tone controls
- AUX RCA input
- Mute terminals
- TEL/Paging terminals
- Paging output level control
- MIC/TEL VOX level control (Internal)
- Speaker terminals (COM, 4 ohm, 8 ohm, 16 ohm, 25V, 70V)
Overview:
Pyle PCM30A 30W PA Mixer-Amplifier with 25V & 70V Outputs
Pyle's PCM30A 30 watt power amplifier provides the juice you need for your 25V or 70V PA speaker system. Connect up two mics using the rear terminals, plus an auxiliary RCA input. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders.
The rear barrier strip offers a wide array of speaker output options. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Rounding out the capabilities of this amp is the Music-On-Hold function, replaceable fuse, and detachable AC power input. Runs on 110 or 220 V.
The wide range of paging and talkover functions make this amplifier perfect for meeting halls, auditoriums, small restaurants, and schools. If you're looking for great sound with the ability to deliver messages when needed, this is the amp for you.
Specifications:
Output power: 30 watts x 1 RMS, 60 watts max
Frequency response (±3 dB): 50 Hz to 15 kHz
THD (at rated output power): 1% or less at 1 kHz
Signal to Noise Ratio (A-weighted):
Mic: 55 dB
Aux: 70 dB
Tel: 60 dB
Input impedance:
Aux: 200 mV, 50kΩ, unbalanced
Mic 1/Mic 2: 1 mV, 600Ω, balanced
Tel/Page: 100 mV, 600Ω, balanced
Speaker outputs: 4Ω, 8Ω, 16Ω; 25V and 70V line
Monitor (MOH) output: 600Ω 1V and 8Ω 1W
Mute level (Aux/Mic 2): 40 dB
Tone controls (±10 dB):
Bass: 100 Hz
Treble: 10 kHz
Power requirement: 120/230 VAC, 60/50 Hz
Dimensions: 10.7" W x 3.46" H x 8.86" D (272 x 88 x 225 mm)
Net weight: 9.79 lbs.
Constant Voltage (70-Volt) Audio Systems
Audio distribution systems, especially those commonly used in department stores, warehouses, restaurants, etc., require that many loudspeakers be driven from a single audio amplifier over long runs of speaker wire. The "constant voltage" or "high impedance distribution" audio systems can be complex to understand at first, however, provides many advantages. Learn how to design your own 70-volt or 25-volt loudspeaker system.
Specification:
Product Details | |
|---|---|
| Brand | Pyle Audio |
| Model | PCM30A |
| Part Number | 248-4262 |
| UPC | 068888896900 |
| Unit of Measure | Each |
| Weight | 11.35 |
Product Specifications | |
|---|---|
| Power Output (RMS @ 70V) | 25W to 50W |
| Weight Range | 10 to 19 lbs. |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category