4.5 out of 5
Pondmaster 02728 Pond-Mag 18 Pond Pump
* Click "Add to Cart" to calculate shipping and delivery time.
Product Description
Manufacture part number: 02728
Pondmaster Pond-Mag 18 Pumps are specifically designed to meet the demands of a pond. Unlike other pumps, magnetic drive pumps are made to run continuously, without seals to wear out. Magnetic drive pumps are highly energy efficient using less energy than direct driven pumps, and they will potentially save hundreds of dollars over time. Filled with epoxy, rather than oil, these pumps cannot leak oil into the pond, which can be harmful or fatal to fish and plants.
Pondmaster's magnetic drive pumps are low-maintenance with only one moving part, a ceramic shaft and impeller. The pumps also feature an ABS case, corrosion-proof fasteners, and heavy duty copper windings, resulting in a durable, energy-efficient, and long lasting pump. All Pondmaster pumps are suitable for statuary, fountains, and ponds.
Pondmaster Pond-Mag 18 Pumps are specifically designed to meet the demands of a pond. Unlike other pumps, magnetic drive pumps are made to run continuously, without seals to wear out. Magnetic drive pumps are highly energy efficient using less energy than direct driven pumps, and they will potentially save hundreds of dollars over time. Filled with epoxy, rather than oil, these pumps cannot leak oil into the pond, which can be harmful or fatal to fish and plants.
Pondmaster's magnetic drive pumps are low-maintenance with only one moving part, a ceramic shaft and impeller. The pumps also feature an ABS case, corrosion-proof fasteners, and heavy duty copper windings, resulting in a durable, energy-efficient, and long lasting pump. All Pondmaster pumps are suitable for statuary, fountains, and ponds.
- High output at low energy use
- Only one moving part- the magnetic impeller
- Ceramic shaft
- Oil-free- eliminates the risk of contamination of aquatic life
- Operates submerged or in-line
- 2 piece barrel filter included
- 5 Year Warranty
| Max Flow: | 1,500 GPH |
| Max Head: | 16' 8" |
| Watts: | 150 |
| Volts: | 120 |
| Discharge Outlet: | 3/4" MPT |
| Inlet: | 3/4" FPT |
| Cord Length: | 18' |
| Dimensions: | 6 7/16" x 4 1/2" x4 2/3" |
| Warranty: | 5 Years |
PUMP FLOW CHART
| GPH per foot of Head | ||||||||
| 0' | 1' | 3' | 5' | 7' | 10' | 15' | 20' | 25' |
| 1,500 | 1,325 | 1,200 | 1,100 | 1,050 | 875 | 575 | - | - |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Product Warranty
This item had 5 years warranty.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Pileated
Date: September 03, 2010
I've had these in various sizes, from a tiny fountain pump to the 1800 gph, all the same simple design. They have gotten rather pricey but you do get a rugged, reliable pump for your money. They work well, are surprisingly small (but heavy), and last a long time if you 1) always use a pre-filter of some kind, 2) keep the pre-filter from clogging, and 3) never forget to clean the impeller before storing the pump (see below). My only and very slight criticism of the Pondmaster 1800 is that the discharge is rather small for a pump of this flow rate.If you shut down your pump for the winter make sure to disassemble and clean it: Remove the impeller housing, carefully pull the impeller out of the motor (it's held in the motor magnetically so you need to pull it out firmly) and clean everything carefully so there is no grit or pond crud on the impeller or inside the motor housing (I use a tooth brush). Neglecting to clean it can result in the pump binding up just long enough to snap the ceramic shaft when you try to start the pump after it has been in storage. Pump warranties don't cover the impeller--- currently ~$27 for the 1800.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By BootCrazy
Date: July 25, 2010
We plugged it in a month ago, and it's been running reliably since. Our old pump, a Beckett, started having problems w/in a year. We like the fact that if this one should have problems, some of the parts can be replaced w/out having to buy a whole new pump. The reviews of this pump are good, so we're keeping our fingers crossed!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]