skip to footer block
CED One Electron P RC 2 Choke One Electron Audio PRC 2 for Shunt Feed SE Output P1619394CED-P-RC-2 https://cdnimages.opentip.com/full/CED/CED-P-RC-2.jpg One Electron P RC 2 Choke One Electron Audio PRC 2 for Shunt Feed SE Output Manufacturer Part Number: P-RC-2The PRC-2 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes. It features a paper bobbin. It has two identical windings allowing series and parallel combinations. It is not recommended for use as a transformer.ConnectionInductanceDC CurrentResistanceImpedanceparallel12 H150 mA76 Ω2.3K Ωseries48 H75 mA304 Ω9K ΩThe table shows the maximum recommended load impedance when used as a shunt-feed choke. As with traditional class-A triode amplifiers, the driving impedance is about 1/2 the load impedance. The recommended load impedances are based on a -1dB response at 20 Hz; for better low frequency response, use a choke with higher recommended load (higher inductance).Measurements and Specs D.C. Current, parallel150 mA D.C. Current, series75 mA Impedance, parallel2.3 kΩ Impedance, series9 kΩ Inductance, parallel12 H Inductance, series48 H Item Height3.38 in. Item Length2.83 in. Item Width4.25 in. Mounting Hole Center to Center A2.25 in. Mounting Hole Center to Center B2.875 in. Mounting Hole Diameter0.187 in. Resistance, parallel76 Ω Resistance, series304 Ω Packaging Dimensions4.6 in. × 3.5 in. × 3 in. Weight (Packaging)5.3 lbs. 1619394 841358110221 5.30lbs 0.00 0.00 0.00
One Electron
79.0800 2023-06-28 In Stock
Share to:

One Electron P-RC-2 Choke - One Electron, Audio, PRC-2, for Shunt Feed SE Output

Brand One Electron
See other products from CED

Upc: 841358110221
SKU: CED-P-RC-2
Price: $79.08
Quantity:
In Stock
Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: P-RC-2

The PRC-2 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes. It features a paper bobbin. It has two identical windings allowing series and parallel combinations. It is not recommended for use as a transformer.



The table shows the maximum recommended load impedance when used as a shunt-feed choke. As with traditional class-A triode amplifiers, the driving impedance is about 1/2 the load impedance. The recommended load impedances are based on a -1dB response at 20 Hz; for better low frequency response, use a choke with higher recommended load (higher inductance).

Measurements and Specs


warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!