0 reviews
Be the first to review this item!
Product Description
- Made of Premium quality 304 stainless steel, which is 10 times more durable than ABS. Resistant to corrosion, Better protect your sanitation.
- Leak-Proof - The hose features double protection with a stainless steel casing and an EPDM inner tube, no more leak problems.
- Dual water pressure modes - The handheld bidet sprayer has 2 water pressure modes(Jet spray and Stream spray modes), an ideal choice for women during pregnancy and menstrual cycles & a choice when facing the embarrassment of running out of toilet paper!
- Flexible Handheld Design - Gives you a convenient and comfortable cleaning experience. You can flexibly control the direction and angle. The holder can be mounted on the toilet or on a wall.
- Easy to Install - Comes with the installation kit so you don't have to buy anything else. All you have to do is to pay attention to your toilet tank's water inlet diameter and choose the right size. *When installing, please make sure that the water supply valve by your toilet is fully turned off and that there is no flow/leak of water before removing any plumbing components from your toilet.
A great cleaning bidet sprayer kit for a whole family, especially for anyone with limited mobility due to surgery, arthritis, postpartum or injuries, ideal for elderly adults, can be used as cloth diaper sprayer, bathroom cleaning and even for pet washing.
Package Include:
1*Bidet Sprayer
1*Sprayer Holder (The holder can be mounted on the toilet or on a wall.)
1*T-Valve
1*4.92ft Hose
1*Teflon Tape
1*Black Rubber Washer(inside T-Valve)
2*Screws and Anchors
1*General manual
How to Install:
Step 1: Turn Off the Water Supply.
TURN OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.
Step 2: Make sure there is a rubber washer inside both the female ends.
Confirm that the flat rubber washer is inside the top of your bidet's T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
Step 3: Connect the T-Valve and the Hoses.
Screw the top of the T-valve onto the toilet's fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet's water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
Step 4: Turn On the Water Supply & Mount the Sprayer.
Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber's tape. If you're leak-free, your hand-held bidet sprayer is installed and ready for use!
Package Include:
1*Bidet Sprayer
1*Sprayer Holder (The holder can be mounted on the toilet or on a wall.)
1*T-Valve
1*4.92ft Hose
1*Teflon Tape
1*Black Rubber Washer(inside T-Valve)
2*Screws and Anchors
1*General manual
How to Install:
Step 1: Turn Off the Water Supply.
TURN OFF the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.
Step 2: Make sure there is a rubber washer inside both the female ends.
Confirm that the flat rubber washer is inside the top of your bidet's T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.
Step 3: Connect the T-Valve and the Hoses.
Screw the top of the T-valve onto the toilet's fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet's water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.
Step 4: Turn On the Water Supply & Mount the Sprayer.
Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber's tape. If you're leak-free, your hand-held bidet sprayer is installed and ready for use!
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item