skip to footer block
EAT Lisle LS29200 3/8" Drive Impact Driver Set P4231050EAT-LS29200 https://cdnimages.opentip.com/full/EAT/EAT-LS29200.jpg Lisle LS29200 3/8" Drive Impact Driver Set Manufacturer Part Number: 29200Loosens Rusted, Frozen Nuts, Bolts and Screws.Unique design delivers over 200 ft. lbs. of \"Shock Torque.\"Can be reversed to tighten. Can also be used with impactsockets! 3/8\" sq. drive with 3/8\" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8\" straight slot bits. 4231050 083045292005 2.4500lbs 1.80 4.10 9.20
Lisle
31.9100 2025-05-21 12 In Stock
customer review - by , May 5, 2018
5/ 5stars
I bought a cheap version of this tool trying to save some money. It arrived in pieces (no kidding). I was able to inspect the tool before sending it back. Went ahead and ordered this tool even though it was more than twice the price. Money well spent. This is a solid tool that has served me well. Usually with tools, you get what you pay for.
customer review - by , April 4, 2018
5/ 5stars
Everyone who works on small engines and who works on anything with rusty nuts and bolts should have one of these. Great tool for what it is designed for
customer review - by , April 4, 2018
4/ 5stars
You call those instructions? good thing it is a simple tool to use.
customer review - by , March 3, 2018
5/ 5stars
Does the job.. easily..try it and you'll love it.
customer review - by , March 3, 2018
5/ 5stars
I bought this product in 2016 and I finally put it to the test. Much to my surprise, I was able to loosen those stubborn rotor brake screws with ease using this tool and replace the worn out rotors on my Honda Odyssey saving me a fortune. Next job, replace the rear brake rotors. I definitely recommend this tool to all DIY auto mecahnics.
customer review - by , March 3, 2018
5/ 5stars
its a solid built tool that works whenever i need it, as an automotive tech that is important.
customer review - by , February 2, 2018
5/ 5stars
A necessary torque shock tool for those stubborn screws and bolts. Proper set up for this tool is necessary for satisfactory results. Improper use will ruin the head of the fastener just as quick as a manual attempt. If you have ever used one you know what I am writing about. Screws on disc rotors are a good test for this tool. It handled the ones on my 2013 Honda Pilot front rotors in short order.
customer review - by , February 2, 2018
5/ 5stars
Bought this impact screwdriver to help me with a brake job on my 2011 Honda Accord. I just need to give this screwdriver at most 3 hits with my 2 lb hammer to loosen the rotor screws. The screwdriver itself is very heavy and well made and the screwdriver bits are very resilient. Seeing as all my family members have Honda vehicle's this will be beneficial in the long run.
customer review - by , January 1, 2018
4/ 5stars
Works good, don't care for "slip" on bit holder.
customer review - by , December 12, 2017
5/ 5stars
I bought the Craftsman branded Lisle driver more than thirty years ago and still works like new. I replaced a handful of Phillips #2 bits over the years but saved many a aluminum motorcycle engine with this tool.
As a side note phillips screws were a cheap production line replacement for slotted screws and not meant to be torqued. Torx and internal square head screws can handle more factory torque and loosening tension without stripping the head.
  »  
  »  
  »  
  »  
  »  

Lisle LS29200 3/8" Drive Impact Driver Set

stars Rating 4.5 | 58 reviews
Brand Lisle
Shop more from EAT
UPC: 083045292005
SKU: EAT-LS29200
Price: $31.91
Quantity:
12 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 29200

Loosens Rusted, Frozen Nuts, Bolts and Screws.Unique design delivers over 200 ft. lbs. of "Shock Torque."Can be reversed to tighten. Can also be used with impactsockets! 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

All EAT- items are returnable, except for Open Box Scan Tools. scan tools/electronics, air tool are non-returnable

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Industrial & Scientific > Power & Hand Tools > Industrial Hand Tools > Tool Sets
Tools & Home Improvement > Power & Hand Tools > Hand Tools > Tool Sets
Customer Reviews
4.5 out of 5
see all 58 reviews
5 stars
44
4 stars
5
3 stars
2
2 stars
2
1 stars
5
Write a Review
By Patrick L. Culwell
Date: September 05, 2017
WORKS
Rating: 5 stars [5 of 5 Stars!]
By Cody T Vliet
Date: August 21, 2017
Way more beat up than i thought it would be
Rating: 1 stars [1 of 5 Stars!]
By tmbink
Date: August 10, 2017
This works wonderful.
Rating: 5 stars [5 of 5 Stars!]
By Chau Q. Tran
Date: July 29, 2017
It very useful and help to remove rusty screws very easy.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: July 26, 2017
Worked great got the job done
Rating: 5 stars [5 of 5 Stars!]
By Brett Harrison
Date: July 25, 2017
Just received it today and had to test it out. While there is what appears to be a push button on the side of the impact driver, I found that this does nothing. I had thought that button was what would be to set to tighten or loosen and that the button was stuck. I put some lubricate spray and tried to push the button either way, but it wouldn't move. So I went online and seen some videos of other very similar impact drivers, and realized all you have to do is twist the end about 1/8 of a turn in the direction you want. Left to loosen --Right to tighten. So I put a screw in the vise and made note of the position of the head of the screw before testing. I proceeded to hammer in the loosen direction. It did work but in very very small increments. So while I haven't actually tested this on a true seized fastener, it does seem to work. No directions were included. Also note that this is a 3/8" socket drive with a included 3/8 drive bit holder. So if you have 1/4 inch bits, "which most of mine are", you will have to reduce it down to work. Hope to actually test this on a stuck fastener soon and put it to the real test.
Rating: 4 stars [4 of 5 Stars!]
Items 25 - 30 of 58 reviews
[Prev]   1  2  3  4  5 ...  [Next]