0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: P-A-C12R-8
Typically used in the lower powered 12" amps for studio or practice, the C12R is a clear sounding, sparkling speaker, very sensitive to the character of amplifier. When paired with a stout, rich and warm electronic design it can do wonders. Ampeg® Jets and Reverberockets are just some of the most revered amps that carried C12R as their factory choice.
Guitarist Description: Warm low and mid response with smooth/bright highs. When presented with overdrive distortion, it presents smooth crunch with low-end focus.
Measurements and Specs
Files
Typically used in the lower powered 12" amps for studio or practice, the C12R is a clear sounding, sparkling speaker, very sensitive to the character of amplifier. When paired with a stout, rich and warm electronic design it can do wonders. Ampeg® Jets and Reverberockets are just some of the most revered amps that carried C12R as their factory choice.
Guitarist Description: Warm low and mid response with smooth/bright highs. When presented with overdrive distortion, it presents smooth crunch with low-end focus.
- Lows: Tight
- Mids: Firm
- Highs: Bright
- Overdrive: Crunchy
Measurements and Specs
| Basket Material | Pressed Sheet Steel | |
| Cone Material | Paper | |
| Depth | 4.3661 in. | |
| Diameter | 12 in. | |
| Diaphragm Area (SD) | 490.90 cm2 | |
| Dust Dome Material | Felt | |
| Equivalent Acoustic Volume (VAS) | 37.50 liters | |
| Flux Density | 1.00 T | |
| Force Factor (BxL) | 6.24 Wb/m | |
| Inner Diameter | 10.9055 in. | |
| Linear Displacement, maximum (XMAX) | 0.80 mm | |
| Losses Electrical Resistance (RES) | 67.00 Ω | |
| Magnet Assembly Diameter | 3.3858 in. | |
| Magnet Type | Ferrite | |
| Magnetic Gap Depth | 6.00 mm | |
| Mechanical Compliance (CMS) | 110.00 µm/N | |
| Mechanical Moving Mass (MMS) | 29.50 g | |
| Mechanical Q Factor (QMS) | 18.52 | |
| Mounting Hole Bolt Circle Diameter | 11.5551 in. | |
| Mounting Hole Diameter | 0.2559 in. | |
| Musical Power | 50.00 W | |
| Nominal Overall Diameter | 306.00 mm | |
| Nominal Voice Coil Diameter | 25.00 mm | |
| Outer Diameter | 12.0275 in. | |
| Rated Power | 25.00 W | |
| Reference Efficiency (nO) | 1.20 % | |
| Resonance Frequency (?S) | 88.30 Hz | |
| Sensitivity @ 1W, 1m | 92.30 dB | |
| Surround Material | Integrated Paper | |
| Surround Treatment | No | |
| Total Q Factor (QTS) | 2.47 | |
| Voice Coil DC Resistance (Re) | 6.70 Ω | |
| Voice Coil Diameter | 1 in. | |
| Voice Coil Former | Kapton | |
| Voice Coil Inductance @ 1 kHZ (LE) | 0.49 mH | |
| Voice Coil Winding Depth | 8.00 mm | |
| Voice Coil Winding Type | Copper |
| Packaging Dimensions | 13.3858 in. × 13.3858 in. × 6.6929 in. | |
| Weight (Packaging) | 4 lbs. |
Files
| Specification Sheet | All Models |
| Blues Sound Sample | All Models |
| Clean Sound Sample | All Models |
| Country Sound Sample | All Models |
| Jazz Sound Sample | All Models |
| Metal Sound Sample | All Models |
| Overdriven Sound Sample | All Models |
| Rock Sound Sample | All Models |
| Terminal Dimensions | All Models |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item