Great product

decent hold strength on magnet.

one of the best tools makers around

very good perfect for door panels

As advertised

The perfect socket to use for a 2007 Sonata door handle screw.The depth of the socket is not too deep, I would have preferred deeper, but the magnet holds it fine. Make sure you socket extension is tight in the socket. I had a Craftsman one that was too loose and the socket could fall off.I ended up using a 1/4 - 1/2 adapter and used my 1/2 extension. You can also buy an entire set of these here.

Not bad quality- magnet is probably a little too strong.

I was really disappointed by this socket. While the metal seems to be of good quality, the socket itself does not seem well made or well designed.<br /><br />First of all the magnet sits too close to the mouth, so the effective depth is quite shallow. This is fine if you are just using it to start a fastener. It's actually really good for starting fasteners, because the magnet is quite strong. However, since the depth is so shallow, as soon as you apply any torque it pops off and begins to round the bolt flange. I was only tightening to 50 inch pounds and I had repeated pop-offs.<br /><br />It also appears that the magnet in mine is not evenly seated.<br /><br />My SK 8mm on the other hand, grips better, has less play, and doesn't pop off or round the flange and costs about the same.

great item, use daily,just what I needed

Works great!!

must have for removing the headlights from an E46 BMW

It's good but magnet came out but did punch it back in and works fine now

Would have preferred the smaller diameter of a non-impact socket, but this one is more convenient than installing a 02-inch diameter magnet in a regular socket.

WORKS GREAT