skip to footer block
EDM Seal Plastics 260P04 Poly Type Plastic Sleeve Fits 1/4In Tubing P3338944EDM-260P-04 https://cdnimages.opentip.com/full/EDM/EDM-260P-04.jpg Seal Plastics 260P04 Poly Type Plastic Sleeve Fits 1/4In Tubing Manufacturer Part Number: 260P04Poly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing\'s burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing.This poly-flo plastic sleeve (EDMO# 260P-04) fits tubing with a 1/4 inch O.D.FeaturesReduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingSpecificationsTube Size:1/4 in (260P04)Materials:Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves;Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, PolyallomerCompatible Tubing:Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:260P04ECCN:EAR99SCHEDULE B CODE:7419.91.0050 3338944 0.0200lbs 0.00 0.00 0.00
Seal Plastics
6.4 2025-05-14 600 In Stock
customer review - by , January 1, 2021
5/ 5stars
Worked great once I found the right PN needed for the brass nuts used on my instrument tubing in my aircraft

Seal Plastics 260P04 Poly-Type Plastic Sleeve , Fits 1/4In Tubing, Price/EA

stars Rating 5 | 1 reviews
Shop more from EDM

SKU: EDM-260P-04
Unit Price:
$0.64Free shipping on orders over $519 on select EDM- items. Details
Min.Order Price: $6.40 for 10 units
Quantity:
600 In Stock
* This item must be ordered in multiples of 10.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with EDM-, and you can get free shipping for an order of over  $519.00  consisting of only EDM- series products.

Product Description

Price is for EA.

Manufacturer Part Number: 260P04

Poly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing.

This poly-flo plastic sleeve (EDMO# 260P-04) fits tubing with a 1/4 inch O.D.

Features

  • Reduces installation time
  • No tool required for installation
  • Excellent holding power without twisting the tubing
  • Universal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing


Specifications

Tube Size:
1/4 in (260P04)

Materials:
Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves;
Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer

Compatible Tubing:
Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

Following items are non-returnable:

Restocking fee 30%
Special Order Items
Lost or "Broken" Traceability
Items Sold as Non-Returnable
Software
Computer Based Products
Programmed Items
Time Sensitive Items
Outdated Items
Used Items
Damaged Items
Opened Items
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 out of 5
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
By Bonanza Pilot
Date: January 12, 2021
Worked great once I found the right PN needed for the brass nuts used on my instrument tubing in my aircraft
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 1 of 1 reviews
 1