Free Shipping PromotionThis item qualifies for free shipping within US 48 states.
Details.
Manufacturer Part Number: 18SW1200F-8
Live sound is back in business! Dayton Audio wants you to hit the road with confidence and maximize your profitability at your next gig. Dayton Audio is a worldwide leader in raw frame drivers. We are passionate audio enthusiasts with a vision to offer the best performance to price value in the industry. After extensive market research, vendor evaluation, and sample driver testing, we are proud to introduce to you the Dayton Audio ODEUM Series.
- Best 4" voice coil ferrite subwoofer value on the planet
- Well balanced SPL to Xmax ratio equates to a loud and long-throw sub
- Aluminum demodulation ring for low distortion and low power compression
- Robust 18" ribbed paper cone for strength and durability
- Under spider and rear periphery venting allow for a cooler running voice coil
- With a Dayton Audio 5 year warranty, it's more than a guarantee, it's a promise. We stand behind our products and our warranty is a demonstration of our commitment to quality and reliability.
Dayton Audio Odeum Apollo 18F 18" Professional Subwoofer 8 Ohm
Dayton Audio Odeum Apollo 18F 18SW1200F-8 18" Professional Subwoofer
ode· um: An ancient Greek and Roman concert hall used for music and poetry.
Using the knowledge from decades of driver design and engineering, Dayton Audio is placing an emphasis on technical excellence, product reliability, and innovation with the Odeum Series of speaker components! The Odeum Series takes the stage with a new line of professional drivers made for any venue.
Key Specs:
- Nominal Diameter: 18"
- Power Handling (RMS): 1200 Watts
- Power Handling (MAX): 2400 Watts
- Impedance: 8 Ω
- Frequency Response: 35Hz - 1kHz
- Sensitivity: 96.4 dB 2.83V/1m
- Voice Coil Diameter: 4"
- Maximum Linear Excursion: 10.6mm
Frequency Response & Impedance
The Dayton Audio Apollo 18F is able to integrate well with a large number of speaker designs due to its relatively flat frequency response. The impedance curve of the Apollo 18F makes it easy to drive without taxing your power amplifiers!
Apollo 18F
The Apollo 18F is an 18" subwoofer that is guaranteed to outperform the stock woofers in your PA system. A 1200W power limit is achieved through the combination of a large ferrite motor, a 4" voice coil with a fiberglass former, and a copper inductance cap to lower distortion. A paper cone with cloth M-roll surrounds provides a neutral tone that is easy to tune, and peripheral venting helps keep the whole system cool when playing!
A solution for every need
We feel we have hit the sweet spot in price and specs in the pro audio market with this workhorse line of subwoofers, midrange, and high-frequency drivers. The ODEUM series consist of two 1200W 18" subwoofers (one neodymium, one ceramic), 5 sizes and various power ratings of neodymium mid-bass, and two 1" exit compression drivers (one bolt-on, one screw-on). Upgrade, replace, or create a new pro sound system with the ODEUM series.
Product Details |
| Brand | Dayton Audio |
| Model | 18SW1200F-8 |
| Part Number | 295-641 |
| UPC | 848791008498 |
| Unit of Measure | Each |
| Weight | 34.7 |
Product Specifications |
| Nominal Diameter | 18" |
| Power Handling (RMS) | 1200 Watts |
| Power Handling (MAX) | 2400 Watts |
| Impedance | 8Ω |
| Frequency Response | 30 to 1,000Hz |
| Sensitivity | 96.4dB 2.83V/1m |
| Voice Coil Diameter | 4" |
Thiele-Small Parameters |
| Resonant Frequency (Fs) | 32Hz |
| DC Resistance (Re) | 6.5Ω |
| Voice Coil Inductance (Le) | 2.25mH |
| Mechanical Q (Qms) | 8.975 |
| Electromagnetic Q (Qes) | 0.42 |
| Total Q (Qts) | 0.4 |
| Compliance Equivalent Volume (Vas) | 10.16ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.13mm/N |
| BL Product (BL) | 24.44T·m |
| Diaphragm Mass Inc. Airload (Mms) | 193.6g |
| Maximum Linear Excursion (Xmax) | 10.6mm |
| Surface Area of Cone (Sd) | 1200cm² |
Materials of Construction |
| Cone Material | Coated Paper |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information |
| Overall Outside Diameter | 18.19" |
| Baffle Cutout Diameter | 16.29" |
| Depth | 7.59" |
| # Mounting Holes | 8 |
Parts Express Staff Recommended Enclosure Volume |
| Sealed Volume | 2.6ft³ |
| Sealed F3 | 70Hz |
| Vented Volume | 5ft³ |
| Vented F3 | 35Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to
www.p65warnings.ca.gov.