0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: P-A-F12-X200-8
Finally a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies for the most accurate output possible whatever your environment and set-up.
The F12-X200's response is remarkably neutral with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker delivering all the physical feedback you'd expect from playing through a conventional guitar rig.
Used with amp modellers or IRs in a backline cab or a wedge monitor on stage or in the studio it doesn't just sound like great guitar tone it feels like it too.
Measurements and Specs
Files
Finally a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies for the most accurate output possible whatever your environment and set-up.
The F12-X200's response is remarkably neutral with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker delivering all the physical feedback you'd expect from playing through a conventional guitar rig.
Used with amp modellers or IRs in a backline cab or a wedge monitor on stage or in the studio it doesn't just sound like great guitar tone it feels like it too.
Measurements and Specs
| Chassis Type | Pressed steel | |
| Cut-out Diameter | 11.1 in. | |
| Diameter | 12.2 in. | |
| Frequency Range | 60 Hz - 20,000 Hz | |
| Magnet Structure Diameter | 170 mm | |
| Magnet Type | Ceramic | |
| Mounting Hole Bolt Circle Diameter | 297 mm | |
| Mounting Slots | 8 | |
| Nominal Diameter | 12 in. | |
| Nominal Impedance | 8 Ω | |
| Overall Depth | 165 mm | |
| Power Rating | 200 W | |
| Resonance Frequency (?S) | 75 Hz | |
| Sensitivity | 97 dB | |
| Voice Coil Diameter | 2 in. | |
| Voice Coil Material | Round copper |
| Packaging Dimensions | 13.75 in. × 13.75 in. × 7.75 in. | |
| Weight (Packaging) | 11.5 lbs. |
Files
| Specification Sheet | All Models |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item