skip to footer block
2SCL Aspire 25 Pcs Unsewn Neoprene Blank Can Cooler Sleeves for Screen Printing Embroidery Sublimation Heat Transfer P155963322SCL-JL64_BLACK https://cdnimages.opentip.com/full/2SCL/2SCL-JL64_BLACK.jpg Aspire 25 Pcs Unsewn Neoprene Blank Can Cooler Sleeves for Screen Printing Embroidery Sublimation Heat Transfer Aspire unsewn can cooler is made of 3mm-thick neoprene. The length of an unsewn can cooler sleeve is 10-1/4 inch (26 cm) and the width is 3-7/8 inch (9.9 cm). After sewing, the can cooler sleeves are suitable for 12 ounce cans such as 330ml regular cans. It can also be used for 16 ounce cans which have the same diameter as 12 ounce and other similar sized bottles.Neoprene is suitable for customization. It makes the higher temperature printing easier than foam. It is convenient to custom on unsewn can cooler sleeves. You can sublimate to the fabric edge. There is no more transfer gaps at the seam.You can press your favorite patterns, your own logos or any other patterns on it with heat transfer, sublimation, screen printing, embroidery and so on. You can also sew some sequins or non-woven fabric on it. Decorate your own can cooler sleeves with your imagination. We also provide customization for you. You can custom the text, logo and images on sewn can cooler sleeves. The minimum order is 10. Also, if you need the colors that we do not list, just let us know your requirements. The minimum order of unsewn can cooler sleeves to custom colors is 150.Aspire unsewn can cooler sleeves need to be sewn after you press your designs on them. You can sew the can cooler sleeves with zigzag stitch by hand or zigzag stitch machine.How to do a zigzag stitch by hand? (The following steps are for the cup sleeve to be placed horizontally.)1. Poke through one of the corner of the can cooler sleeve to the front of the fabric.2. Align the side of the can cooler sleeve and stitch a vertical line.3. Insert the needle to the starting point and pull the needle and thread through from back to front.4. Move the stitch diagonally across and insert the needle at the point lying even with the point in the second step.5. Insert the needle through the fabric from the back to the front at a point lying even with the point in the first step and diagonally beneath the point in the fourth step.6. Insert the needle through the fabric from the front to the back at the point in the fourth step.7. Insert the needle through the fabric from the front to the back at the point in the fifth step.8. Repeat the fourth to seventh step down to the length of the cup sleeve.9. Stitch a vertiacl line at the end of the cup sleeve.10. Overlap the end of the point.11. Knot the stitch in the back.12. Another side is sewn by the same way. 15596332 0.4800lbs 0.12 9.90 26.00
Aspire
10.42 2025-02-23 In Stock

Aspire 25 Pcs Unsewn Neoprene Blank Can Cooler Sleeves for Screen Printing Embroidery Sublimation Heat Transfer - Black

Brand Aspire
See other products from 2SCL

SKU: 2SCL-JL64
List Price: $18.45
Price: $10.42
Buy in bulk & save 27% ($7.64 each)
Style:
Color: Black
Quantity:
In Stock
*  Shipping Note: Usually ships within 1 to 2 weeks.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $10.42 ea X 1 qty = $10.42
Quantity Price Save
1+ $10.42 0%
4+ $10.22 2%
10+ $9.89 5%
50+ $9.31 11%
100+ $8.77 16%
500+ $8.26 21%
1000+ $7.64 27%
This item is excluded from use of other offer, discount or coupon.

Product Description

  • Size: When the unsewn can cooler sleeves are unfolded, the length is 10-1/4 inch (26 cm) and the width is 3-7/8 inch (9.9 cm). After sewing, the can cooler sleeves are suitable for 12 ounce cans. They also fit 16 ounce cans which has the same diameter as 12 ounce or similar-sized bottles.
  • Package: There are 25 unsewn can cooler sleeves in one package. You can choose the color you like to match your bottles or the party theme. If you want to order other colors that we do not list, just let us know your requirements.
  • Materials: Aspire can cooler is made of 3mm thick neoprene to keep your drinks cold. Great for hot days to keep your drinks cold and your hands dry. Enjoy the cold drinks for a long time when you use Aspire can cooler sleeves.
  • Available for DIY: Aspire unsewn can cooler sleeves are good for DIY projects. You can apply your own logos and patterns with the technique of screen printing, sublimation, heat transfer, embroidery and so on.
  • Application: The can cooler sleeves with your design can be gifts for your friends or families on weddings, parties, birthdays and so on.
Aspire unsewn can cooler is made of 3mm-thick neoprene. The length of an unsewn can cooler sleeve is 10-1/4 inch (26 cm) and the width is 3-7/8 inch (9.9 cm). After sewing, the can cooler sleeves are suitable for 12 ounce cans such as 330ml regular cans. It can also be used for 16 ounce cans which have the same diameter as 12 ounce and other similar sized bottles.
Neoprene is suitable for customization. It makes the higher temperature printing easier than foam. It is convenient to custom on unsewn can cooler sleeves. You can sublimate to the fabric edge. There is no more transfer gaps at the seam.
You can press your favorite patterns, your own logos or any other patterns on it with heat transfer, sublimation, screen printing, embroidery and so on. You can also sew some sequins or non-woven fabric on it. Decorate your own can cooler sleeves with your imagination. We also provide customization for you. You can custom the text, logo and images on sewn can cooler sleeves. The minimum order is 10. Also, if you need the colors that we do not list, just let us know your requirements. The minimum order of unsewn can cooler sleeves to custom colors is 150.

Aspire unsewn can cooler sleeves need to be sewn after you press your designs on them. You can sew the can cooler sleeves with zigzag stitch by hand or zigzag stitch machine.

How to do a zigzag stitch by hand? (The following steps are for the cup sleeve to be placed horizontally.)
1. Poke through one of the corner of the can cooler sleeve to the front of the fabric.
2. Align the side of the can cooler sleeve and stitch a vertical line.
3. Insert the needle to the starting point and pull the needle and thread through from back to front.
4. Move the stitch diagonally across and insert the needle at the point lying even with the point in the second step.
5. Insert the needle through the fabric from the back to the front at a point lying even with the point in the first step and diagonally beneath the point in the fourth step.
6. Insert the needle through the fabric from the front to the back at the point in the fourth step.
7. Insert the needle through the fabric from the front to the back at the point in the fifth step.
8. Repeat the fourth to seventh step down to the length of the cup sleeve.
9. Stitch a vertiacl line at the end of the cup sleeve.
10. Overlap the end of the point.
11. Knot the stitch in the back.
12. Another side is sewn by the same way.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Custom Printing & Artwork

This item can be imprinted with a company's name, logo or message. We've got the solution that will exceed your expectations and fit within your budget. Let us help with your needs of custom production, large or small. To discuss your specific needs please Contact Us. If you email, please include the following information to speed up the process: your company name and contact information, logo, order quantity, delivery deadline, and specific needs.

How do I send my artwork?

Click here for all you need to know about sending your logo or artwork to us.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!