Adams Rite 4913-45-IB Heavy Duty Deadlatch, Lock Body Only, 1-1/2 In. Backset, Less Strike, LH or RHR, Zinc Plated

Product Specs

Vendor : ASSA Abloy

Manufacturer : Adams Rite

SKU : 4913-45-IB

UID : ADA100491345IB

Unit of Measure : Each

Origin : USA

BAA Qualified : Yes

Installation : Commercial

Limited Warranty : 5 Years

Base Material : Steel

Finish

Finish
603/US2G

Finish Description : Zinc Plated

Finish Family : -

Technical Specs

Handing : Field Reversible

Cylinder Type : Less Cylinder

Std. Latch Type : Dead Latch (Guarded)

Function : Narrow Stile Latch Lock

Lock Face Size : 6-7/8" x 1"

Bolt Projection : 5/8"

Screws : Machine

Std. Latch Backset Dim : 1-1/2"

Std. Strike Number : LESS

Dimensions

Pack Qty : 1

Ship Weight : 1.25 lbs.

Product Length : 6.87"

Product Width : 1"

Product Height : 2.14"

Pack Length : 8.88"

Pack Width : 3.25"

Pack Height : 2.13"

Pack Volume : 61.29 in³

4900 Heavy Duty Deadlatch

• Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
• Cylinder Backset: 31/32", 1-1/8", or 1-1/2"
• Case: Measures 7/8" x 5-13/16" x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating. Screw-fastened tube spacer brackets allow for cleaner removal when tab mounting.
• Latchbolt: 5/8" x 1" x 5/8" throw. Solid brass. Handing is easily reversible using only a screwdriver.
• Auxiliary Latchpin: Stainless steel. Deadlocks latch bolt to prevent "loiding" or case-knife entry.
• Faceplates: Measures 1" x 6-7/8". Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.
• Strikes: Standard strike furnished is 4902 for flat jamb where door closes flush or nearly flush. Specify 4901 for retrofit installations. Also available: radius strike for opposite stile in paired doors and long lip strikes for centerhung doors.
• Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS for cylinder make, thumbturn and trim ring information.
• Options: Backset, strike, and finish must be specified when ordering. For information on handles, paddles, and lever operators, see TRIM. See ELECTRIC STRIKES for compatible access control products. See 4920AN Heavy Duty Deadlatch (ANSI Size) for wood and hollow metal door applications.
• Standard Package: Individually boxed with flat and radius faceplates, strike, and machine screws for mounting. Order cylinders, paddles, handles, or lever operators separately. Shipping weight: 1-1/4 lbs.