skip to footer block
NTP ARB 3450440 Combar/T Jl 18On P15840124NTP-ARB3450440 https://cdnimages.opentip.com/full/NTP/NTP-ARB3450440.jpg ARB 3450440 Combar/T Jl 18On Manufacturer Part Number: 3450440Bumper; Stubby Bar; One Piece Design; Direct Fit; Mounting Hardware Included; With Grille Guard; With Internal Winch Mount; With D-Ring Mounts; With Fog Light Coutouts; Powder Coated Black Steel; With Jacking PointsAttributes Type: 1-Piece Tubular: No Air Bag Compatible: No Finish: Powder Coated Color: Black Material: Steel Drilling Required: No Hitch Type: Without Receiver Maximum Gross Trailer Weight: Without Receiver Maximum Tongue Weight: Without Receiver With Grille Guard: Yes With Grille Screen: No With Bull Bar: No With Winch Mount: Yes Winch Compatible: Yes Tow Hooks: With Tow Hook Mounts D-Rings: With D-Ring Mounts With Light Cutouts: Yes Light Type: Lights - Sold Separately With Mounting Hardware: Yes With Skid Plate: No With Spare Tire Mount: No With License Plate Mount: No With Jacking Points: Yes With CB Antenna Mount: No Estimated Install Time (Hours): 4 Product DescriptionThe Stubby Bumper has been developed for the off-roader who is after a winch platform, while maintaining maximum clearance for larger diameter tires. Generally vehicles that run larger than 35\" tires may rub the tire on the wings of a traditional style ARB Deluxe Bumper. The Jeep Stubby Bumpers eliminates this issue with the bumper as wide as the vehicle\'s iconic grille panel. Similar to our range of ARB Bumpers, the Stubby Bumpers feature a 3 Inch main tube and each upright wing section with provisions for jacking points. Brackets are provided for fitment of driving lights to the bumper, and 0.79 Inch thick 350 grade recovery points tie in through the wings and into the chassis mounting directly. The winch platform will allow the mounting of most traditional low-mount style winches and narrow-mount pattern competition type winches.Features Integrated Recovery Points That Are Certified To Carry Over 8 Tones This Accessory Is Expertly Engineered And Finished In Black To Blend Into The Bar Comes With Mounting Holes For ARB\'s LED Light Bar To Provide Security For This Product When Mounted On This Bar Bolt On Pedestal Type Mounts Are Provided For Fitment Of A Large Range Of ARB Lights Eliminating The Need For A Mounting Bracket, These High-Lift Jacking Points Are Integrated Into The Design Of Summit Bumpers Limited 3 Year Or Unlimited Mile Warranty 15840124 9332018054111 598.8400lbs 30.00 30.00 80.00
ARB
1275.0740 2025-05-01 7 In Stock

ARB 3450440 Combar/T Jl 18On

Brand ARB
Shop more from NTP

UPC: 9332018054111
SKU: NTP-ARB3450440
Price: $1,275.07
Quantity:
7 In Stock
*  Shipping Note: Usually ships within 1 to 2 weeks.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 3450440

Bumper; Stubby Bar; One Piece Design; Direct Fit; Mounting Hardware Included; With Grille Guard; With Internal Winch Mount; With D-Ring Mounts; With Fog Light Coutouts; Powder Coated Black Steel; With Jacking Points

Attributes
  • Type: 1-Piece
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: Yes
  • With Grille Screen: No
  • With Bull Bar: No
  • With Winch Mount: Yes
  • Winch Compatible: Yes
  • Tow Hooks: With Tow Hook Mounts
  • D-Rings: With D-Ring Mounts
  • With Light Cutouts: Yes
  • Light Type: Lights - Sold Separately
  • With Mounting Hardware: Yes
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With License Plate Mount: No
  • With Jacking Points: Yes
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 4


Product Description

The Stubby Bumper has been developed for the off-roader who is after a winch platform, while maintaining maximum clearance for larger diameter tires. Generally vehicles that run larger than 35" tires may rub the tire on the wings of a traditional style ARB Deluxe Bumper. The Jeep Stubby Bumpers eliminates this issue with the bumper as wide as the vehicle's iconic grille panel. Similar to our range of ARB Bumpers, the Stubby Bumpers feature a 3 Inch main tube and each upright wing section with provisions for jacking points. Brackets are provided for fitment of driving lights to the bumper, and 0.79 Inch thick 350 grade recovery points tie in through the wings and into the chassis mounting directly. The winch platform will allow the mounting of most traditional low-mount style winches and narrow-mount pattern competition type winches.

Features
  • Integrated Recovery Points That Are Certified To Carry Over 8 Tones
  • This Accessory Is Expertly Engineered And Finished In Black To Blend Into The Bar
  • Comes With Mounting Holes For ARB's LED Light Bar To Provide Security For This Product When Mounted On This Bar
  • Bolt On Pedestal Type Mounts Are Provided For Fitment Of A Large Range Of ARB Lights
  • Eliminating The Need For A Mounting Bracket, These High-Lift Jacking Points Are Integrated Into The Design Of Summit Bumpers
  • Limited 3 Year Or Unlimited Mile Warranty


This item is overweight. we may contact you when we process the order.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!