skip to footer block
ATY AC Infinity AIRLIFT T14 Shutter Exhaust Ventilation Fan 14" Temperature and Humidity Controller P12285965ATY-AC-ALT14 https://cdnimages.opentip.com/full/ATY/ATY-AC-ALT14.jpg AC Infinity AIRLIFT T14 Shutter Exhaust Ventilation Fan 14" Temperature and Humidity Controller A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.Fan Size: 14” | Dimensions: 16.93 x 16.93 x 6.42 in. | Airflow: 2418 CFM | Noise: 68 dBA | Bearings: Dual BallProduct DescriptionA high-airflow exhaust fan designed to cool and ventilate greenhouses, garages, attics, workshops, and sheds. The system can automatically eliminate heat, moisture, odor, and dust from enclosures, rooms and buildings. Features a LCD display with remote smart temperature and humidity sensors, as well as customizable fan speeds. Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels. Heavy-duty build features aluminum blades, steel wire guards, and galvanized-steel shutters. Includes everything needed to mount the fan unit and power it through an outlet.Smart ProgrammingThe controller included with each unit features active temperature and humidity monitoring. Fan speeds can be programmed to automatically adjust to high and low temperatures and humidity. The program can be manually set to run continuously or on a timer at custom speeds. Also features alarm warnings, fan failure alerts, eco-mode, and backup memory. Included 12-foot corded sensor probe plugs into the controller to provide temperature and humidity readings. The controller can control up to two AIRLIFT series fans. Heavy-Duty PerformanceFeatures galvanized-steel shutters that are weather and corrosion resistant, and automatically closes when not in use. The blades and impeller are constructed of lightweight aluminum, weight-balanced to reduce vibrations. Utilizing an innovative EC motor that is controlled electronically using PWM (Pulse Width Modulation), the fans can maximize airflow while reducing noise and power consumption. The fully-enclosed motor is also permanently lubricated and houses dual-ball bearings that are rated at 67,000 hours and allow this fan system to be mounted horizontally or vertically. The unit is IP-44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments. Product Identification Manufacturer AC Infinity Inc. Product Name AIRLIFT T14 Product Model AC-ALT14 UPC Code 819137020924 Product and Mounting Dimensions - Fan Unit Total Dimensions 16.93 x 16.93 x 6.42 in (43.0 x 43.0 x 16.3 cm) Frontside Enclosure Dimensions 14.52.X 14.52 in (36.9 x 36.9 cm) Required Mounting Hole 14.68.X 14.68 in (37.3 x 37.3 cm) Hole to Hole Distance 15.75 x 15.74 in (40.0 x 40.0 cm) Screw Hole Size Ø 0.27 in (Ø 0.7 cm) Cord Length to Controller 240 in (20 feet) Product and Mounting Dimensions - Controller Total Dimensions 5.19 x 2.91 x 1.06 in. (13.2 x 7.4 x 2.7 cm) Hole to Hole Distance 4.71 x 2.64 in. (12.0 x 6.7 cm) Screw Hole Size Ø 0.119 in (Ø 0.3 cm) Display Size 3.5 x 1.4 in. (9 x 3.5 cm) Cord Length to Plug 96 in (8 feet) Sensor Probe Length 144 in. (12 feet) Product Performance and Technical Specs Total Airflow 2418 CFM Total Noise 68 dBA Static Pressure 27.6mm-H2O Operating Voltage 120V AC Power 400W Current 5.6 A Operating Humidity 35 to 85% RH Operating Temperature 0 to 158°F Fan Bearings Dual Ball L10 Life Expectency 67,000 Hours Product Manual Product ManualPDF 12285965 819137020924 24.2400lbs 10.00 20.00 20.00
AC Infinity
219.0000 2025-04-30 In Stock
customer review - by , October 10, 2023
5/ 5stars
The versatility and controllability is unparalleled.
customer review - by , September 9, 2023
5/ 5stars
customer review - by , September 9, 2023
5/ 5stars
customer review - by , August 8, 2023
5/ 5stars
Fans work good. Have been using them daily for 3 months with no issues. Control programmer screen is very difficult to see in bright light.
customer review - by , August 8, 2023
5/ 5stars
This works like a charm. Easy to operate and put in. My roof vents don't work well because they covered the openings with felt. The attic would become boiling and cause the second floor to become so hot during the day. Installation was simple. Had to install a plug in the attic for the wire but other than that it was simple to set the high temp limit and watch it turn on when it hit the temp and then turn off when it reached below the limit. A must have for any attic space!
customer review - by , July 7, 2023
5/ 5stars
I needed an extraction fan that would ventilate a 1200 sf shop in the summer. The installation was easy and the shop temperature dropped by 15 degrees. The thermostat works great and it automatically will turn the fan on when it gets to 80 degrees. You can control the temperature range and other parameters. I am very happy with the purchase.
customer review - by , July 7, 2023
5/ 5stars
I was wondering if an attic fan would really work because I've heard many different things from many different places. So, I decided to conduct my own experiment. I have an EcoBee Smart thermostat with 3 temperature sensors across my house, I am able to see exactly when my ac kicks on, the temperature outside, when the attic fan is running and the temperature up there. ... without getting too deep into it I will say, yes, it absolutely does work. I tried running the attic fan for 18 hrs one day, then 20 hrs the next, then completely off, all while monitoring the indoor temp, attic temp, room temperatures, outdoor temp, when the rooms cool down, how long it takes, when the AC kicks on and so on. In a summary, what I discovered is that running the attic fan from about 12 PM to 5 AM (15 hrs per day) cools the attic by 15 degrees at its peak, by doing this, the central AC does not kick on until 4 hrs later, saves 4 hrs of AC per day. To break that down into a rough estimate in cost - that means it costs me about 0.20 to run the attic fan per hr = 3.00 . The AC is about .50 per hr, running it without the attic fan for 10hrs per day = 5$ per day, with the attic fan it cuts that down to 6 hrs per day = 3$ per day. 33 = 6 per day. This is 1$ more per day to run the attic fan with AC, so, im actually spending about 30$ more per month with the attic fan! Now, like I said, this is a rough estimate, I'm guessing it is actually more of a wash because the ac run times are less often with the attic fan running. Now, this is where I think it is beneficial, your AC has a life span obviously, with saving 4hrs of runtime everyday, you're extending you AC's life by many years, my approximation is about 11,000 hrs or run time, thats pretty darn good because AC units are not cheap! (About 5500$.) Also, you're helping your house breathe, therefore extending the life of your roof, which also is not cheap to replace (about 10,000$.), so, for me, that's where the savings really come into play. I also noticed the humidity level was near zero up there without the attic fan, by looking on Google, that is not good and your attic should have some humidity, the attic fan provided this needed humidity. I am using the 14 fan and had to cut a little under 1/4 from each stud to make it fit right, but it worked out fine. I recommend getting as big of fan as possible to really move the air well personally, but make sure it will fit first! The probe is 19 feet from the unit and cooling about 600 sq ft of insulated attic. The fan is directly above my bedroom and I can hear it with my window open at night, on full blast, but its not bad, like a white noise. I hope that's helpful to anyone concerning buying one, I'm happy with my purchase and do recommend it. Stay cool :)Update : using automations - It took several days and paying attention to the graphs, fan run times, outdoor Temps, and attic temp, but I got the run time total down to about 5.3hrs per day, so now to run the fan I am only spending about 1.20$ per day and accomplishing the same goal. With that done, I am expecting to now save about 30 - 40$ per month in electricity.
customer review - by , June 6, 2023
5/ 5stars
This works great for greenhouse ventilation. Install, program and forget. Quiet, powerful and efficient. This unit replaced the AC Infinity 16T, which (for my application) was somewhat glitchy. The display would go blank, displaying (---) and shutting down. It would also trip the GFI breaker from time to time. This became more frequent over time to the point of where after 3 years it would trip the breaker when it was plugged in. Meanwhile in the other greenhouse we used this AC Infinity 14T with no problems and great performance. Now both greenhouses are running like a top. Thanks to the folks at AC Infinity. They truly care and are there for their customers. By the way did I mention they have actual people talking to you on the phone. Shout out to AC Infinity
customer review - by , June 6, 2023
5/ 5stars
Solid product. Powerful draw and reasonably quiet. Installed in attic to evacuate summer heat but its Seattle so the hot days are a few weeks away. I am confident we will see improvement in our upstairs temperatures.
customer review - by , May 5, 2023
5/ 5stars
This is the second fan we have bought. One fan is in our greenhouse. I set it at 100 degrees and it comes on as scheduled and does a great job of exhausting the heat. The louvers open nicely and close tight.installingwas not complicated. Just follow the instructions. Then it's plug and play.The second fan is installed in the pitch of the attic in the house. It comes on as programmed for temperature and humidity and pulls air thru the house and drops the temperature inside the house by 5 degrees. The fanpulls the stale air and improves the air quality.
  »  
  »  
  »  
  »  
  »  
  »  

AC Infinity AIRLIFT T14, Shutter Exhaust Ventilation Fan 14", Temperature and Humidity Controller

stars Rating 5 | 61 reviews
Brand AC Infinity
Shop more from ATY
UPC: 819137020924
SKU: ATY-AC-ALT14
Price:
$219.00& this item ships for FREE Shipping. Details
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back

Product Description

Free Shipping Promotion
This item qualifies for free shipping within US 48 states. Details.

  • A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
  • Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.
  • Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
  • Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
  • Fan Size: 14” | Dimensions: 16.93 x 16.93 x 6.42 in. | Airflow: 2418 CFM | Noise: 68 dBA | Bearings: Dual Ball

Product Description


A high-airflow exhaust fan designed to cool and ventilate greenhouses, garages, attics, workshops, and sheds. The system can automatically eliminate heat, moisture, odor, and dust from enclosures, rooms and buildings. Features a LCD display with remote smart temperature and humidity sensors, as well as customizable fan speeds. Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels. Heavy-duty build features aluminum blades, steel wire guards, and galvanized-steel shutters. Includes everything needed to mount the fan unit and power it through an outlet.

Smart Programming


The controller included with each unit features active temperature and humidity monitoring. Fan speeds can be programmed to automatically adjust to high and low temperatures and humidity. The program can be manually set to run continuously or on a timer at custom speeds. Also features alarm warnings, fan failure alerts, eco-mode, and backup memory. Included 12-foot corded sensor probe plugs into the controller to provide temperature and humidity readings. The controller can control up to two AIRLIFT series fans.

Heavy-Duty Performance


Features galvanized-steel shutters that are weather and corrosion resistant, and automatically closes when not in use. The blades and impeller are constructed of lightweight aluminum, weight-balanced to reduce vibrations. Utilizing an innovative EC motor that is controlled electronically using PWM (Pulse Width Modulation), the fans can maximize airflow while reducing noise and power consumption. The fully-enclosed motor is also permanently lubricated and houses dual-ball bearings that are rated at 67,000 hours and allow this fan system to be mounted horizontally or vertically. The unit is IP-44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 61 reviews
5 stars
50
4 stars
11
3 stars
0
2 stars
0
1 stars
0
Write a Review
By Brian
Date: July 28, 2022
My husband and I live in Florida and he does a lot of projects and stuff in the garage, but when he proposed putting a fan in the garage I laughed. I didn't think it would make much of a difference considering that we have a 3 car garage and the fan isn't that big. It really made a difference and easily drops the temperature in the garage 10 degrees! It's so powerful that when we open the door from the house to the garage it sucks it open. It took my husband a full day to install, but it was definitely worth it.
Rating: 5 stars [5 of 5 Stars!]
By Motor12
Date: July 18, 2022
Perfect for my 3 car garage based woodshop. I wanted an exhaust system that would serve two functions: Remove fine dust while working in the woodshop. And to cool down the garage by pushing out hot air and sucking in cool air through my garage roof vents. This does both very well. I purchased two fans since my shop is 600 square feet and has an open ceiling. This required some additional ventilation requirements since the amount of air I needed to circulate was substantial. I have studs that are 16 inch on center and did not want to cut the studs. Instead of going with a larger fan, I went with two of these. My wall is almost 6 inches total thickness when adding in the stucco, drywall, and wood siding on the interior wall. As a result, the outside opening would have been recessed quite a bit. So I opted to purchase separate fan shutters for a flush fit on the outside. I removed the shutters that came with the fan since they were not needed. I got the fan shutters from Grainger item 53DR16. These fans move a lot of air for their size and are not very loud at all compared to some shop fans I have used. Summers are very hot here in So Cal and I will program the fans to turn on automatically around 2 am when the outside air is cool. Now when I go in my shop in the morning, the temps should be more comfortable. Highly recommend this product.
Rating: 5 stars [5 of 5 Stars!]
By Steve Rortvedt
Date: July 15, 2022
The instructions for the keypad are not good enough for the average Lehman
Rating: 5 stars [5 of 5 Stars!]
By john Reiss
Date: July 13, 2022
sensor only good from 40 degrees to 90 deg they sent me a new sensor with the same response talked to tech support and that's what it's rated for so alarm settings are useless otherwise it seems good
Rating: 5 stars [5 of 5 Stars!]
By dick
Date: June 12, 2022
easy to install and program
Rating: 5 stars [5 of 5 Stars!]
By Kenny Lippard
Date: June 08, 2022
Was easy to install, very quiet when running, works amazing!
Rating: 4 stars [4 of 5 Stars!]
Items 19 - 24 of 61 reviews
[Prev]   1  2  3  4  5 ...  [Next]