5 out of 5
Customer Reviews
By
Jake H
Date: October 10, 2023
I use it in my pellet stove bearings. It works great
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Andrew
Date: September 06, 2023
This stuff solved my issues of resin sticking to my FEP sheet on my Halot Mage 3D printer
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: May 07, 2023
A must have for resin 3D printer , now less print failures . just apply with cotton on the Nfep before you put the resin
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Henny kunzig
Date: May 07, 2023
I treated the FEP of my 3D resin printer with this and I barely hear the 'rip' when the build plate is lifted after UV exposure. Helps avoid build failures.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
RobTattoo
Date: March 11, 2023
I use this to relieve sticking on my resin 3d printer FEP sheet and so far seems to be working great
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Trevor
Date: March 07, 2023
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Tonya
Date: February 27, 2023
It's been weird how hard this has been to find lately. Thankfully I was able to order some here. There are several different makers of ptfe lubricant and this one is the best in my opinion. If you need it, get it now. Before it disappears again.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By
Douglas H. Carlson
Date: February 18, 2023
Purchase this product to put on my step screen of my resin printer to keep my prince from sticking as much just a little bit goes a long ways and so far so good
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
yazman
Date: January 28, 2023
This is a new product for me. I have been using it on jointed tools. It seems to work very well.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Douglas H. Carlson
Date: January 28, 2023
This is a new product for me. I have been using it on jointed tools. It seems to work very well.
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By
Anthony Kinz
Date: December 23, 2022
I used it on my garage door springs and hinges and it made it very quiet. I highly recommend it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
yazman
Date: December 23, 2022
I used it on my garage door springs and hinges and it made it very quiet. I highly recommend it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Michael Nellis
Date: December 16, 2022
Bought it for my Leatherman Wave, which upon arrival was somewhat underlubricated (when you opened the thing, it made gentle scraping sounds. I didn't like that). Couple drops of this cleared that right up! Also works on hinge pins, but you have to dismantle the hinge to get it in there. This is not really a problem for the most part, but it is good to know.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Niko Artley
Date: December 16, 2022
Bought it for my Leatherman Wave, which upon arrival was somewhat underlubricated (when you opened the thing, it made gentle scraping sounds. I didn't like that). Couple drops of this cleared that right up! Also works on hinge pins, but you have to dismantle the hinge to get it in there. This is not really a problem for the most part, but it is good to know.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Michael Nellis
Date: December 14, 2022
I soak my FEP sheet for a few minutes then wipe clean. Seems to help keep the plastic from sticking to aging FEP sheets.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Shaiden
Date: December 14, 2022
I soak my FEP sheet for a few minutes then wipe clean. Seems to help keep the plastic from sticking to aging FEP sheets.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: November 18, 2022
I've used this on door hinges, wheels of toys and exercise equipment. Gets rid of the squeak and things move smoother now.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Verner E Laursen
Date: November 11, 2022
Originally bought this to assist with problems I was having on my lowe end mSLA 3d printers and cured resin sticking too strongly with the FEP material. Taking some advice from online communities a couple of drops of this on the resin tank helped me find the balance between too much adhesion however I've been finding it also better than some of the traditional oil lubricants on mechanical projects.I've been getting a lot of 608zz ball bearings in bulk packages but finding the packing oil leaving some of them jammed up. A bit of a wash in 99 IPA and a few drops of the PTFE lubricant after the alcohol vaporated left me with some much-imprved bearings. For makers and tinkerers, this is a great compliment to WD-40 and standard 3-in-1 oils
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Verner E Laursen
Date: October 27, 2022
been using 3-in-1 for years, heck I'm sure my parents have been using it long before I was born and for good reason, it just is so handy to have. I use mine in a little oil can with flexi-spot, just a squirt here and there and no more door squeaks, axle whine, keeps sliding metal running smoothly, everything you expect a good oil to. The added PTFE I honestly can't say if it really makes a meaningful difference over original blend or not for my use, but doesn't hurt it either, maybe the hinges will take an extra 6 months to start squeaking again or a year, but not sure, not like I keep a track of it hah, just know it is useful to have around.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Classick Morales.
Date: October 27, 2022
been using 3-in-1 for years, heck I'm sure my parents have been using it long before I was born and for good reason, it just is so handy to have. I use mine in a little oil can with flexi-spot, just a squirt here and there and no more door squeaks, axle whine, keeps sliding metal running smoothly, everything you expect a good oil to. The added PTFE I honestly can't say if it really makes a meaningful difference over original blend or not for my use, but doesn't hurt it either, maybe the hinges will take an extra 6 months to start squeaking again or a year, but not sure, not like I keep a track of it hah, just know it is useful to have around.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]