Free Shipping PromotionThis item qualifies for free shipping within US 48 states.
Details.
Manufacturer Part Number: TEM-EML100
The Marker-Mate Electronic Marker Locator (EML-100) built by Tempo Communications is designed to locate underground buried electronic markers, including Tempo OmniMarker at industry-standard frequencies.
The EML-100 re-sets the industry standard with the updated capability of detecting nine different electronic marker types of buried utilities simultaneously, when in scan mode (power, European power, water, sanitary, telephone, fiber optic, gas, cable TV, non-potable water). The EML-100 is also user-selectable for any one of the marker types.
Utilizing digital signal processor technology, the Marker-Mate is the most sophisticated and highest performing marker locator available. At the same time, the Marker-Mate was built to operate in all weather conditions. Tempo's Marker-Mate, Omni Marker, and Spike Marker...a complete solution.
Features:Five+ foot depth rangeDetects up to nine different marker typesScan mode provides simultaneous detection of all marker typesUser-adjustable Detection ThresholdDigital signal processor accuracyLarge-character display is easy to readBar graph, numeric & audible signal strength indicatorsSpeaker volume adjustHeadphone jackBattery level indicatorLow battery warningWeather resistantRugged constructionAdjustable time out feature prolongs battery life (and can be turned off)Patented - Patent #7095231, 7170411
Specifications:Electrical: Twelve AA batteries, Battery Life: 20 hours typicalOperating Temperature: -4°F to 122°F (-20°C to 50°C)Storage Temperature: -40°F to 158°F (-40°C to 70°C)Environment: Weather ResistantLength: 30.7 in.Width: 7.8 in.Height: 12.8 in.Weight: 4.5 lbs. with batteriesHousing Material: High density welded polyethylene Identification: Solid moulded colour and moulded text Detection Range: 1.5 m typical (5 ft) for all models (using Tempo EML-100 or RD8000MRX)Detection Field: Dipole (Uni Marker model), Spherical (Omni Marker model) Frequency tolerance: ± 0.35 % Detection Offset: 15 cm (6") maximum at 1.5 m (5 ft) Overall Diameter: 115 mm (4½") max Minimum Trench Width: 100 mm (4") Omni Marker case is dimpled to allow this 115 mm (4½") for UniMarker devices Anchoring: Two "tie down" loops along flange. UniMarker devices are supplied with a mounting clip Detection Offset (for OmniMarker or horizontally mounted UniMarker): 15 cm (6") maximum at 1.5 m (5 ft) Weight: 136 g (0.3 lb) OmniMarker models, 70 g (2½ oz) UniMarker models Interior Foam (OmniMarker models only): Ensures precise mechanical alignment of the coils and structural strength Water Penetration: Housing welded leak tight. Pressure tested at productionCrush strength: 35 pounds (155 N) applied with 0.187" (4.75 mm) radius point causes less than 0.25" (6 mm) deflection. 400 pounds (1780 N) uniformly distributed load with 1.55" (40 mm) aggregatePuncture resistance: 22 pounds (100 N) applied with a point that has a 1/64 Inch (0.4 mm) radiusChemical Resistance: High density polyethylene has good resistance to non-oxidising acids, alkalis and solvents (tested with diesel fuel, gasoline, alcohol, acetone and motor oil)Drop and Shock Resistance: 20 foot (6 m) drop on concrete Interior Foam (OmniMarkers only): Provides mechanical alignment of the coils and structural strengthTemperature: -30 C to +65 C (operation), -40 C to +75 C (storage) UV Resistance:1 year direct sunlight (simulating storage)
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to
www.p65warnings.ca.gov.