skip to footer block
PEX Parts Express PT2313 DC 12 24V IR Remote Control Tone Preamp board with 3 Aux Inputs P11701670PEX-320-6010 https://cdnimages.opentip.com/full/PEX/PEX-320-6010.jpg Parts Express PT2313 DC 12 24V IR Remote Control Tone Preamp board with 3 Aux Inputs Add manual and wireless tone control to an amplifier board with this preamp board with IR remote. It has three AUX inputs for adding Bluetooth, and FM preamp boards plus a 3.5 mm or dual RCA jacks to add versatility to your audio project.Key Features: Adds extra inputs, plus manual and wireless tone control to amp boards Accepts DC power from 12 to 24 VDC for versatility Blue backlit display for operating status and a professional looking finish PT2313 DC 12-24V IR Remote Control Tone Preamp board with 3 Aux InputsThis audio preamp board has multiple features to enhance any audio project. With three selectable line inputs switch between FM radio, Bluetooth, 3.5 mm or RCA jacks. The digital display shows which AUX input you\'re listening to, along with volume level. Push the treble button on the IR remote and the display temporarily switches to treble volume. Do the same with the bass button. Without the remote press the correct button on the manual control board and it will toggle between bass and treble. The display shows if you\'re increasing the bass or treble with the volume control knob.When you press the on/off button for this preamp board it turns off the amplifier board. Hook a DC power cable from your amp\'s power source into the voltage input on the preamp board. Hook another DC cable to the power output on the preamp board and reconnect the other end to your amplifier board. The relay on the preamp board will disconnect the power from your amp board\'s power source until you turn the preamp board back on. The preamp board is in standby mode until you turn the power back on. To disable the preamp boards standby mode you must insert an on/off switch into the preamp board\'s 12 to 24 VDC input.Specifications: Voltage input: 12 to 24 VDC 12 VDC relay: Handles up to 30 VDC @ 3A Frequency response: 10 Hz-40 kHz SNR, A-weighted: 95 dB Channel crosstalk: 62 dB Bass adjustment: +/- 8 dB @ 85 Hz (bump) Treble adjustment: +/- 8 dB @ 1 kHz (shelf) Preout voltages: 2.5V max Max input sensitivity voltage: 800 mV Current draw @ 24 VDC: 0.05A Standby current draw @ 24 VDC: 0.02A MaxProduct Details BrandParts Express Part Number320-6010 UPC848864059976 Unit of MeasureEach Weight0.3 Product Specifications Board TypePreamp Special FeaturesRemote Control-Volume / Tone Control 11701670 848864059976 0.3600lbs 0.00 0.00 0.00
Parts Express
19.98 2025-04-26 Out of Stock
customer review - by , September 9, 2022
4/ 5stars
November '22 update: I mixed up 2 review points and I removed the errant info and I also bumped up a star because they're an American company that answers the phone if you call with questions and I was impressed with their staff.So first if you're buying this kit look closely at the button input board and note that the PH-2A jack is facing the same direction as the input button faces and if you're trying to mount the board to a panel like the 3D printed faceplate I designed I realized that you can't because the input jack is on the wrong side. It wasn't too hard to un-solder the jack and put a new one on what I think is the correct side of the board but we warned it's not something everyone is comfortable doing themselves and it probably voided my warranty because I modified it.I also wish I could feed this unit data like an I2C input because the second line always says MUSIC WORLD and I want to feed it the IDv3 data from the Bluetooth 5.0 module I'm using to display artist and track info that's playing instead.Oh and I was right in my original review: you cannot turn off the individual zones like an RV head unit but I worked around it by using the preamp volume controls so I've made due.I'm hoping that a next-gen version of this product will be released that addresses the aforementioned points and I'll definitely buy it.

Parts Express PT2313 DC 12-24V IR Remote Control Tone Preamp board with 3 Aux Inputs

stars Rating 4 | 1 reviews
Shop more from PEX

UPC: 848864059976
SKU: PEX-320-6010
Price:
$19.98Free shipping on orders over $65 on select PEX- items. Details
Buy in bulk & save 19% ($16.12 each)
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $19.98 ea X 1 qty = $19.98
Quantity Price Save
1+ $19.98 0%
4+ $19.33 3%
10+ $17.18 14%
50+ $16.12 19%
This item is excluded from use of other offer, discount or coupon.

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $65.00  consisting of only PEX- series products.

Product Description

Add manual and wireless tone control to an amplifier board with this preamp board with IR remote. It has three AUX inputs for adding Bluetooth, and FM preamp boards plus a 3.5 mm or dual RCA jacks to add versatility to your audio project.

Key Features:
  • Adds extra inputs, plus manual and wireless tone control to amp boards
  • Accepts DC power from 12 to 24 VDC for versatility
  • Blue backlit display for operating status and a professional looking finish


PT2313 DC 12-24V IR Remote Control Tone Preamp board with 3 Aux Inputs

This audio preamp board has multiple features to enhance any audio project. With three selectable line inputs switch between FM radio, Bluetooth, 3.5 mm or RCA jacks. The digital display shows which AUX input you're listening to, along with volume level. Push the treble button on the IR remote and the display temporarily switches to treble volume. Do the same with the bass button. Without the remote press the correct button on the manual control board and it will toggle between bass and treble. The display shows if you're increasing the bass or treble with the volume control knob.

When you press the on/off button for this preamp board it turns off the amplifier board. Hook a DC power cable from your amp's power source into the voltage input on the preamp board. Hook another DC cable to the power output on the preamp board and reconnect the other end to your amplifier board. The relay on the preamp board will disconnect the power from your amp board's power source until you turn the preamp board back on. The preamp board is in standby mode until you turn the power back on. To disable the preamp boards standby mode you must insert an on/off switch into the preamp board's 12 to 24 VDC input.

Specifications: Voltage input: 12 to 24 VDC 12 VDC relay: Handles up to 30 VDC @ 3A Frequency response: 10 Hz-40 kHz SNR, A-weighted: 95 dB Channel crosstalk: 62 dB Bass adjustment: +/- 8 dB @ 85 Hz (bump) Treble adjustment: +/- 8 dB @ 1 kHz (shelf) Preout voltages: 2.5V max Max input sensitivity voltage: 800 mV Current draw @ 24 VDC: 0.05A Standby current draw @ 24 VDC: 0.02A Max

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
4 out of 5
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
By A Customer
Date: September 07, 2022
November '22 update: I mixed up 2 review points and I removed the errant info and I also bumped up a star because they're an American company that answers the phone if you call with questions and I was impressed with their staff.So first if you're buying this kit look closely at the button input board and note that the PH-2A jack is facing the same direction as the input button faces and if you're trying to mount the board to a panel like the 3D printed faceplate I designed I realized that you can't because the input jack is on the wrong side. It wasn't too hard to un-solder the jack and put a new one on what I think is the correct side of the board but we warned it's not something everyone is comfortable doing themselves and it probably voided my warranty because I modified it.I also wish I could feed this unit data like an I2C input because the second line always says MUSIC WORLD and I want to feed it the IDv3 data from the Bluetooth 5.0 module I'm using to display artist and track info that's playing instead.Oh and I was right in my original review: you cannot turn off the individual zones like an RV head unit but I worked around it by using the preamp volume controls so I've made due.I'm hoping that a next-gen version of this product will be released that addresses the aforementioned points and I'll definitely buy it.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 1 of 1 reviews
 1