skip to footer block
EDM EDMO M27500 20TG4T14 M27500 20Tg4T14 Extruded Etfe Tefzel™ Wire 20 Awg 4 Conductor P8259313EDM-20TG4T14 https://cdnimages.opentip.com/full/EDM/EDM-20TG4T14.jpg EDMO M27500 20TG4T14 M27500 20Tg4T14 Extruded Etfe Tefzel™ Wire 20 Awg 4 Conductor Manufacturer Part Number: M27500-20TG4T14SAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer-insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications - including airframes, avionics, and ground support equipment.M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from - including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-20TG4T14 Tefzel™ wire (EDMO# 20TG4T14) meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.FeaturesStranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingSpecificationsSAE AS22759/18 SPECIFICATIONS:Gauge:20 AWGNumber of Strands:19Strand Size:32Outside Diameter (Insulation):0.049 - 0.053 inConductor Diameter:0.038 inWeight:4.60 LB/MFTImpedance (@ 20°C):9.8 Ω/MFT, maximumNumber of Conductors:4, (20TG4T14)Mil-Spec:M27500NEMA Type:WC 27500Conductor Material:tin-plated copperInsulation Material:extruded ethylene tetrafluoroethylene (ETFE)Shield Material:tinned copper braidShield Coverage:85%Jacket Material:extruded ethylene tetrafluoroethylene (ETFE)Temperature:150°C, maximumVoltage Rating:600 VSAE Specification:SAE-AS 22759/18M27500 SPECIFICATIONS:Temperature Rating:Up to 200°C (392°F) depending on the type of constructionInsulator:(RC-06) - Polytetrafluoroethylene (PTFE)(RC-09) - Extruded PTFE(TE-14, TG-14) - Extruded Ethylene Tetrafluoroethylene (ETFE)Conductor:(RC-06, RC-09) - Stranded Silver Coated Copper(TE-14, TG-14) - Stranded Tin CopperJacket: (RC-06) - PTFE Tape(RC-09)- Extruded FEP (RC-09)(TE-14, TG-14) - Extruded ETFEOther Designations:NEMA WC 27500, SAE AS22759Product CodesMfr Part No:M27500-20TG4T14ECCN:EAR99SCHEDULE B CODE:8544.11.0050 8259313 0.0400lbs 0.00 0.00 0.00
EDMO
1235 2025-04-28 4472 In Stock

EDMO M27500-20TG4T14 M27500-20Tg4T14 Extruded Etfe Tefzel™ Wire , 20 Awg, 4-Conductor, Price/FT

Brand EDMO
Shop more from EDM

SKU: EDM-20TG4T14
Unit Price:
$2.47Free shipping on orders over $519 on select EDM- items. Details
Min.Order Price: $1,235.00 for 500 units
Quantity:
4472 In Stock
* This item must be ordered in multiples of 500.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with EDM-, and you can get free shipping for an order of over  $519.00  consisting of only EDM- series products.

Product Description

Price is for FT.

Manufacturer Part Number: M27500-20TG4T14

SAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer-insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications - including airframes, avionics, and ground support equipment.

M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from - including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.

M27500-20TG4T14 Tefzel™ wire (EDMO# 20TG4T14) meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.

Features

  • Stranded, tin-plated, copper conductor
  • Extruded Ethylene tetrafluoroethylene (ETFE) insulation
  • Tin-plated, copper-braided shield with 85% coverage
  • Thin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket
  • 150°C maximum temperature
  • 600 volt rating


Specifications

SAE AS22759/18 SPECIFICATIONS:

Gauge:
20 AWG

Number of Strands:
19

Strand Size:
32

Outside Diameter (Insulation):
0.049 - 0.053 in

Conductor Diameter:
0.038 in

Weight:
4.60 LB/MFT

Impedance (@ 20°C):
9.8 Ω/MFT, maximum

Number of Conductors:
4, (20TG4T14)

Mil-Spec:
M27500

NEMA Type:
WC 27500

Conductor Material:
tin-plated copper

Insulation Material:
extruded ethylene tetrafluoroethylene (ETFE)

Shield Material:
tinned copper braid

Shield Coverage:
85%

Jacket Material:
extruded ethylene tetrafluoroethylene (ETFE)

Temperature:
150°C, maximum

Voltage Rating:
600 V

SAE Specification:
SAE-AS 22759/18

M27500 SPECIFICATIONS:

Temperature Rating:
Up to 200°C (392°F) depending on the type of construction

Insulator:
(RC-06) - Polytetrafluoroethylene (PTFE)
(RC-09) - Extruded PTFE
(TE-14, TG-14) - Extruded Ethylene Tetrafluoroethylene (ETFE)

Conductor:
(RC-06, RC-09) - Stranded Silver Coated Copper
(TE-14, TG-14) - Stranded Tin Copper

Jacket:
(RC-06) - PTFE Tape
(RC-09)- Extruded FEP (RC-09)
(TE-14, TG-14) - Extruded ETFE

Other Designations:
NEMA WC 27500, SAE AS22759

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

Following items are non-returnable:

Restocking fee 30%
Special Order Items
Lost or "Broken" Traceability
Items Sold as Non-Returnable
Software
Computer Based Products
Programmed Items
Time Sensitive Items
Outdated Items
Used Items
Damaged Items
Opened Items
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!