5 out of 5
Dayton Audio XO2W-2K 2-Way Speaker Crossover 2,000 Hz
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: XO2W-2K
The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low-pass sections.
Key Features:
Overview:
Dayton Audio XO2W-2K 2-Way Speaker Crossover 2,000 Hz
The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low pass sections. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low-pass section allows use of 4 or 8 ohm woofers, perfect for building D'Appolito style or multi woofer 2-way systems. The high pass crossover frequency is rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. 300W power handling. Board measures: 6-1/2 W x 4-1/4 H x 1-3/8 D.
Specification:
Manuals & Resources:
The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low-pass sections.
Key Features:
- 18 gauge inductors are used to keep DC resistance to a minimum
- Unique design feature of the low-pass section allows for use of 4 or 8 ohm woofers
- All components are glued or fastened down to eliminate buzzing and vibrations
- High quality blue PC board uses a back plate for added rigidity
Overview:
Dayton Audio XO2W-2K 2-Way Speaker Crossover 2,000 Hz
The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low pass sections. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low-pass section allows use of 4 or 8 ohm woofers, perfect for building D'Appolito style or multi woofer 2-way systems. The high pass crossover frequency is rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. 300W power handling. Board measures: 6-1/2 W x 4-1/4 H x 1-3/8 D.
Specification:
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | XO2W-2K |
| Part Number | 260-140 |
| UPC | 844632045134 |
| Unit of Measure | Each |
| Weight | 1.25 |
Product Specifications | |
|---|---|
| Configuration | Assembled Board Only |
| Crossover Type | 2-Way |
Manuals & Resources:
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By George
Date: March 24, 2025
Good product easy to mount switchable crossover point
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By loquatious of the borg
Date: February 26, 2025
Well, it does what it says. I would have preferred a slightly different XOVER frequency. It seems well made and I used it (with an external amp, of course) as an inexpensive alternative to replacing a one-of-kind amplifier in a powered speaker. This is for a garage system so if it plays loudly and annoys my neighbors it's all good. One thing...I am not in love with the wire connection points, but that was not a deal breaker.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By Lamaat
Date: February 16, 2025
Excellent crossover, looks fantastic.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By RegularJoe
Date: January 22, 2025
Good Value for low budget. Had to replace a woofer in a Rockville 12" PA speaker, bought this to replace original crossover at same time. Sounds much better
Rating: [4 of 5 Stars!]
[4 of 5 Stars!]
By SYMTRIT
Date: November 06, 2024
First off.....if you are unfamiliar with the idea of how a crossover works, and why, do not expect a random crossover to suit your speakers properly. The component values need to match, within reason, your speakers needs and electrical values. This requires a very complex understanding of many things. This particular crossovers values put quite a bit of mid to higher frequency, and volume, into the woofer, which, to my ears (depending on speaker components and values) suits Jazz/classical/etc type music quite well. Lots of clarity in the music. This may give the appearance of "less bass" on some speakers and to some ears and for some music. Again, this is extremely dependent on you speaker types, cabinets, etc etc etc. So far theses have definitely been a great buy for my situation.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By BennyZ
Date: October 02, 2024
The Trebble is much louder and clearer the, my old crossover and theres no distortion or white noise at much higher volumes unlike my old ones, also the sound is more accurate and sounds amazing on my 50" loudspeakers, However I have to turn my bass all the way up to be balanced. But now it sounds awesome, update i turned bass management on in my computer setting and it fixed my low bass problem still no distortion but they vibrate my floor now
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]