0 reviews
Be the first to review this item!
Product Description
Price is for each.
- Pump Tube: Polypropylene
- Tube Length: 47"
- Max. Temp.: 122° F
- Impeller: Axial-flow rotor
The Lutz polypropylene pump tube is used with a wide range of acids and alkalis. It is suitable for pumping clean and dirty, thin bodied and slightly viscous, aggressive and non-aggressive liquids out of containers. The pump tube is non-lubricated, preventing contamination of the liquids pumped.
This Lutz seal-less design pump tube (the drive shaft of this pump tube is not sealed) has a bearing housing unit above the impeller, designed to prevent pumped liquid from rising between the shaft and the inner tube. This device guides the liquid which penetrates between the drive shaft and the shaft bearing back into the container being drained.
The polypropylene pump tube has a standard length of 47 inches for IBC tanks or smaller. The polypropylene pump tube has a polypropylene axial-flow rotor impeller for a low delivery rate and high delivery head. The bearings are ETFE/PTFE and has a Hastelloy C drive shaft.
The GPM, delivery head, viscosity, and specific gravity depends on the motor selected with this sealless designed polypropylene pump tube.
Note: Pump tubes are available for higher pressures and viscosity with high head impellers.
| Flow Rate | 53 GPM |
|---|---|
| Material | Polypropylene |
| Brand | Lutz Pumps Inc. |
| Weight | 10 lbs |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Product Warranty
varies product by product, usually 1 yr
Return Policy
Custom made items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item