GDTALEKO AR2000NOR AP Sliding Gate Opener AR2050 Basic KitP9334721GDT-AR2000NOR-APhttps://cdnimages.opentip.com/full/GDT/GDT-AR2000NOR-AP.jpgALEKO AR2000NOR AP Sliding Gate Opener AR2050 Basic Kit Manufacturer Part Number: AR2000NOR-AP PRODUCT DESCRIPTION:The latest addition to ALEKO family of slide gate operators is ALEKO AR2050 Basic Kit Sliding Gate Opener for sliding Gate. It is AC powered and designed with a 120V AC (2 HP equivalent) motor. This gear rack sliding gate opener provides exceptional starting torque and continuous operation which makes it ideal for most applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. 20 ft gear rack tracks is included (6 pcs Gear Racks, 3.3 Ft each, total: 20 Ft); if your gates more 18 ft in length just purchase an extra racks in \"Parts\" section.The heavy-duty motor supports gates weighing up to 2000 lbs and up to 60 ft in length. FEATURES:Opens gates weighing up to 2000 lb and up to 55 ft in lengthComes with built-in Radio receiverSupports up to 100 Remotes2 included User programmable and user erasable remote codesRF hopping code technology prevents your remote code being accessible to othersAuto-Close FeaturePower Supply: AC 120VOperating Time: 0 - 44 secondsFor your safety, this model will stop and reverse if is encounters an obstruction on closing and stop when it encounters an obstruction on openingManual key release design for emergency purposesPedestrian modeSingle Phase MotorMotor and drive system are immersed in lubricating oil, helping reduce noise and extend the life of your transmission UPC: 013964717716933472164987002029140.0000lbs0.000.000.00
Free Shipping Promotion This item qualifies for free shipping within US 48 states. Details.
Manufacturer Part Number: AR2000NOR-AP
PRODUCT DESCRIPTION:
The latest addition to ALEKO family of slide gate operators is ALEKO AR2050 Basic Kit Sliding Gate Opener for sliding Gate. It is AC powered and designed with a 120V AC (2 HP equivalent) motor. This gear rack sliding gate opener provides exceptional starting torque and continuous operation which makes it ideal for most applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. 20 ft gear rack tracks is included (6 pcs Gear Racks, 3.3 Ft each, total: 20 Ft); if your gates more 18 ft in length just purchase an extra racks in "Parts" section.The heavy-duty motor supports gates weighing up to 2000 lbs and up to 60 ft in length.
FEATURES:
Opens gates weighing up to 2000 lb and up to 55 ft in length
Comes with built-in Radio receiver
Supports up to 100 Remotes
2 included User programmable and user erasable remote codes
RF hopping code technology prevents your remote code being accessible to others
Auto-Close Feature
Power Supply: AC 120V
Operating Time: 0 - 44 seconds
For your safety, this model will stop and reverse if is encounters an obstruction on closing and stop when it encounters an obstruction on opening
Manual key release design for emergency purposes
Pedestrian mode
Single Phase Motor
Motor and drive system are immersed in lubricating oil, helping reduce noise and extend the life of your transmission
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
If the product is damaged and notations have been made on the delivery receipt, please do one of the following: 1. Keep the whole shipment and we will compensate the cost of repair if needed, or we can replace the damaged unit for a new one if marked DAMAGED. 2. Refuse just part of the shipment and keep the non-damaged items, then let us know about your decision. A new replacement will be re-shipped to you only if notations with the word DAMAGED have been made. Also, please provide photos of the damage if possible.
If you accept the damaged package without any notation on the delivery receipt, WE ARE NOT RESPONSIBLE FOR THE DAMAGED PRODUCT AND WE ARE UNABLE TO REPLACE ANY PARTS OR COMPENSATE ANY REPAIR COSTS. We highly recommend that you do not schedule gate installations prior to receiving your gate due to possible shipment delays and/or damages.
Need more information?
Our staff are available to answer any questions you may have about this item