5 out of 5
Dayton Audio RS180-4 7" Reference Woofer 4 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: RS180-4
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, and gold spring terminals.
Key Features:
Dayton Audio RS180-4 7" Reference Woofer 4 Ohm
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, and gold spring terminals.
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, and gold spring terminals.
Key Features:
- 4 ohm impedance is perfect for series pairs in MTMs and center channel speakers
- Excellent car audio midrange/midbass
- High-end low-distortion motor with two shorting paths to reduce inductance
Dayton Audio RS180-4 7" Reference Woofer 4 Ohm
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, and gold spring terminals.
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | RS180-4 |
| Part Number | 295-374 |
| UPC | 844632054242 |
| Unit of Measure | Each |
| Weight | 5.1 |
Product Specifications | |
|---|---|
| Nominal Diameter | 7" |
| Bolt Circle Diameter | 6.63 |
| Moving Mass Of Diaphragm (Mmd) | 17.8 |
| Power Handling (RMS) | 60 Watts |
| Power Handling (MAX) | 120 Watts |
| Impedance | 4Ω |
| Frequency Response | 39 to 3,600Hz |
| Sensitivity | 89.2dB 2.83V/1m |
| Voice Coil Diameter | 1.5" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 38.4Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 0.45mH |
| Mechanical Q (Qms) | 2.13 |
| Electromagnetic Q (Qes) | 0.59 |
| Total Q (Qts) | 0.46 |
| Compliance Equivalent Volume (Vas) | 0.75ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.97mm/N |
| BL Product (BL) | 4.71T·m |
| Maximum Linear Excursion (Xmax) | 6mm |
| Surface Area of Cone (Sd) | 124.7cm² |
Materials of Construction | |
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 7.11" |
| Baffle Cutout Diameter | 5.75" |
| Depth | 3.23" |
| # Mounting Holes | 6 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.38ft³ |
| Sealed F3 | 67Hz |
| Vented Volume | 1ft³ |
| Vented F3 | 33Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Jester Fan "Stay True"
Date: June 03, 2011
I have Built a 2 way design using this 7" dayton reference woofer paired with a silk done tweeter and the result is fantastic. The dayton has the required excursion to produce some impressive volume. and with a well tuned box you can bring out very good balanced bass.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Michigancapri92
Date: February 03, 2011
I received an email that this item was shipped out yesterday at 11:00PM and it arrived this morning before 9:30 AM they wasted no time with shipping!! product looks very nice, very good strong construction need to build the boxes and will follow up once i hear how they sound.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 2 of 2 reviews
1