Tekmar 150 1 Stage Setpoint Control W/Remote Sensor Replaces 160, Price/each

• Set Point Control
• Item Set Point Control
• Type Programmable, Digital, 1-Stage
• Switch Type DIP
• Overall Dimensions 2-7/8 Inch Width x 7/8 Inch Depth x 4-3/4 Inch Height
• Current Rating 0.02 Amp
• Input Supply Rating 24 Volt AC 50/60 Hertz 24 Volt DC 1.3 Volt Amp
• Inclusions/Features 10 Kilo Ohm at 77 Deg F NTC Thermistor, Universal Sensor
• Application Indoor, Heating/Cooling System
• Applicable Standard UL, CAS (Canada and US)
• Control Type Microprocessor
• Enclosure Type NEMA 1
• Enclosure Material White PVC
• Ambient Temperature -20 to 120 Deg F
• Humidity 90 Percent RH (Non-Condensing)
• Time Delay 0 to 19 Minute 50 Second (Bang/Bang)
• Cycle Length 30 Second to 19 Minute 50 Second (PWM)
• Operating Mode Heating/Cooling
• Electrical Rating 2 Volt Amp at 24 Volt AC (Demand), 1/6 HP at 240 Volt AC 5 Amp (Relay)

Features / Benefits

• Indoor Use Only
• 1-Stage
• Heat or Cool Set Point Control
• Pulse Width Modulation Control
• Digital Display
• Normally Open and Normally Closed Relay
• Bang-Bang Control Outputs Turn Equipment on When there is a Demand for Heating or Cooling and then Shut it Completely Off When the Demand is Satis?ed
• The Pulse Width Modulation (Pwm) Control Output is an On/Off Action but Differs from the Simple Bang-Bang by Changing the Length of the "On" Time Based on How Much the Actual Temperature Differs from the Desired Temperature