0 reviews
Be the first to review this item!
Pricing Note
Handling Fee Reminding: $3.00 handling fee will be charged for ALL items from the same series, product code beginning with AGN- if you order less than $50.00.
Product Description
Manufacturer Part Number: HD-1270
Manual Cable and Wire Stripper with Extra Bits (WS-1270)
The HD-1270 will easily remove the insulation from most cables and wire allowing you to get premium scrap prices. Independently adjustable blade and rollers allows the HD-1270 to accommodate wires ranging from 0.51mm to 17mm and in any shape including Romex, square, parallel and triangle insulation. Mounting the HD-1270 can be done by clamping the unit to the corner of any workbench or by bolting the stripper directly to the top surface. All the necessary hardware needed to mount the HD-1270 in either configuration is included. Operating the HD-1270 is as simple as the design. To begin stripping your cable or wire, insert the beginning of the cable into the stripper and through the guide rollers. Adjust the guide rollers to secure and centre the cable, adjust the blade to penetrate the outer jacket. After securing the blade, pull the cable or wire through the stripper until the insulation has been completely stripped. 2 high speed steel replaceable blades are included and can be re-sharpened. Accommodates wires from 0.51mm to 17mm, either solid or stranded. Independently adjustable blade and rollerssmoothly strips wires of ANY shape (Romex, square, parallel, triangle, etc). Base for bolt down permanently, no extra hardware needed.
Manual Cable and Wire Stripper with Extra Bits (WS-1270)
The HD-1270 will easily remove the insulation from most cables and wire allowing you to get premium scrap prices. Independently adjustable blade and rollers allows the HD-1270 to accommodate wires ranging from 0.51mm to 17mm and in any shape including Romex, square, parallel and triangle insulation. Mounting the HD-1270 can be done by clamping the unit to the corner of any workbench or by bolting the stripper directly to the top surface. All the necessary hardware needed to mount the HD-1270 in either configuration is included. Operating the HD-1270 is as simple as the design. To begin stripping your cable or wire, insert the beginning of the cable into the stripper and through the guide rollers. Adjust the guide rollers to secure and centre the cable, adjust the blade to penetrate the outer jacket. After securing the blade, pull the cable or wire through the stripper until the insulation has been completely stripped. 2 high speed steel replaceable blades are included and can be re-sharpened. Accommodates wires from 0.51mm to 17mm, either solid or stranded. Independently adjustable blade and rollerssmoothly strips wires of ANY shape (Romex, square, parallel, triangle, etc). Base for bolt down permanently, no extra hardware needed.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
All AGN- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item