skip to footer block
HFL Hafele 521.99.580 Parallel Shelf Pins for Parallel Rod Wine Storage P16142839HFL-521-99-580 https://cdnimages.opentip.com/full/HFL/HFL-521-99-580.jpg Hafele 521.99.580 Parallel Shelf Pins for Parallel Rod Wine Storage Manufacturer Part Number: 521.99.58018 Pins, GrayItem details Spring-loaded to allow the quick and easy installation of the parallel rods into standard 5 mm shelf pin holesMaterialABS Plastic Load bearing capacity 4.00 kg Load bearing capacity 9 lbs Note on load bearing capacity per parallel rod Installation The parallel rod should be cut 22 mm (7/8\") shorter than the interior dimensions of the casework sidewall Note Each parallel shelf pin (PSP) has a spring that slips over the spline. Insertthe spline into the Parallel Rod on each end. The shelf pin compresses intothe Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls.To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place. Color Gray Order reference Two parallel shelf pins are required for each parallel rodAdditional informationEach parallel shelf pin (PSP) has a spring that slips over the spline. Insertthe spline into the Parallel Rod on each end. The shelf pin compresses intothe Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls.To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.tec-doc-04783806.pdf 16142839 4.0000lbs 0.00 0.00 0.00
Hafele
37.36 2026-04-26 In Stock

Hafele 521.99.580 Parallel Shelf Pins, for Parallel Rod Wine Storage, Price/Pack

Brand Hafele
Shop more from HFL

SKU: HFL-521-99-580-P
Price: $37.36
Color: Gray
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for Pack.

Manufacturer Part Number: 521.99.580

18 Pins, Gray

Item details

Spring-loaded to allow the quick and easy installation of the parallel rods into standard 5 mm shelf pin holes

Material



ABS Plastic

Load bearing capacity


4.00 kg

Load bearing capacity


9 lbs

Note on load bearing capacity



per parallel rod

Installation



The parallel rod should be cut 22 mm (7/8") shorter than the interior dimensions of the casework sidewall

Note



Each parallel shelf pin (PSP) has a spring that slips over the spline. Insert
the spline into the Parallel Rod on each end. The shelf pin compresses into
the Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls.
To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.

Color



Gray

Order reference



Two parallel shelf pins are required for each parallel rod

Additional information

Each parallel shelf pin (PSP) has a spring that slips over the spline. Insert
the spline into the Parallel Rod on each end. The shelf pin compresses into
the Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls.
To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.

tec-doc-04783806.pdf

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!