skip to footer block
BCR CRL Loctite® Adhesive P14190410BCR-37438 https://cdnimages.opentip.com/full/BCR/BCR-37438.jpg CRL Loctite® Adhesive Manufacturer Part Number: 0144-P Superior Holding Power Up to 3000 psiJoins Glass to Metal Permanently in Just SecondsClear ColorCRL Loctite® Minute Bond Adhesive permanently bonds non-porous materials such as glass, metal, tile, coated wood, plastics, and nylon with superior strength holding power up to 3,000 psi. The combined Primer and Adhesive two-step application offers handling strength in 10 seconds, 60% full strength in two minutes, and a full cure in 24 hours. Kits contain both adhesive and primer.Catalog Number:0144Contents:1.69 Fl. Oz. (50 ml) Adhesive / 6 Oz. (170 g) PrimerAerosol Primer:6 oz. (170 g)Ship Via:Hazardous Material - No Air ShipmentsShipping Weight:1 lb (454g)Case Qty:5NOTE: Minute Bond Adhesive is only recommended for use on non-porous flat surfaces that are to be mated together with a gap of .004\" maximum. Where bond gaps are large, up to a maximum of .02\", or faster cure speed is required, primer should be applied to both surfaces. Primer should be 72°F (22°C) or warmer.This product is not normally recommended for use on plastics, particularly thermoplastic materials where stress cracking of the plastic could result. Confirm compatibility of the product with such substrates. 14190410 1.2000lbs 0.00 0.00 0.00
CR Laurence
69.17 2027-01-06 23 In Stock

CRL 37438 Loctite® Rear View Mirror Adhesive 12 Cards Per Box

Brand CR Laurence
Shop more from BCR

23 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 0144-P

  • Superior Holding Power Up to 3000 psi
  • Joins Glass to Metal Permanently in Just Seconds
  • Clear Color


  • CRL Loctite® Minute Bond Adhesive permanently bonds non-porous materials such as glass, metal, tile, coated wood, plastics, and nylon with superior strength holding power up to 3,000 psi. The combined Primer and Adhesive two-step application offers handling strength in 10 seconds, 60% full strength in two minutes, and a full cure in 24 hours. Kits contain both adhesive and primer.



    NOTE: Minute Bond Adhesive is only recommended for use on non-porous flat surfaces that are to be mated together with a gap of .004" maximum. Where bond gaps are large, up to a maximum of .02", or faster cure speed is required, primer should be applied to both surfaces. Primer should be 72°F (22°C) or warmer.

    This product is not normally recommended for use on plastics, particularly thermoplastic materials where stress cracking of the plastic could result. Confirm compatibility of the product with such substrates.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    Return could only be applied within 7 days after delivery.

    You may also like
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    0 reviews
    Be the first to review this item!