0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: F10
The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure.
Key Features:
HiVi F10 10" Woofer
The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure. The F10 utilizes a newly developed matrix of Kevlar and paper fibers. The cone weighs less, is more rigid, and has an improved damping factor. It keeps distortion very low through the woofer's wide frequency and power range. The driver has a vented pole piece to avoid air compression and ensure maximum power handling. The long-throw design provides clean and articulate bass performance at high volumes. A massive aluminum die-cast basket has been developed to minimize structural resonances. Recommended crossover frequency, 300Hz.
The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure.
Key Features:
- Light and extremely rigid cone made from Kevlar/paper composite
- High loss rubber surround
- High power handling polyimide former voice coil
- Long-throw motor system with extended linear excursion capability
- High-density aluminum die-cast basket
HiVi F10 10" Woofer
The HiVi F10's design has been optimized for dynamic low bass performance in a compact or medium size vented enclosure. The F10 utilizes a newly developed matrix of Kevlar and paper fibers. The cone weighs less, is more rigid, and has an improved damping factor. It keeps distortion very low through the woofer's wide frequency and power range. The driver has a vented pole piece to avoid air compression and ensure maximum power handling. The long-throw design provides clean and articulate bass performance at high volumes. A massive aluminum die-cast basket has been developed to minimize structural resonances. Recommended crossover frequency, 300Hz.
Product Details | |
|---|---|
| Brand | HiVi |
| Model | F10 |
| Part Number | 297-450 |
| UPC | 844632021329 |
| Unit of Measure | Each |
| Weight | 10.14 |
Product Specifications | |
|---|---|
| Nominal Diameter | 10" |
| Moving Mass Of Diaphragm (Mmd) | 72.6 |
| Power Handling (RMS) | 100 Watts |
| Power Handling (MAX) | 200 Watts |
| Impedance | 8Ω |
| Frequency Response | 28 to 3000Hz |
| Sensitivity | 89dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 28Hz |
| DC Resistance (Re) | 6.5Ω |
| Mechanical Q (Qms) | 5.12 |
| Electromagnetic Q (Qes) | 0.33 |
| Total Q (Qts) | 0.31 |
| Compliance Equivalent Volume (Vas) | 2.78ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.42mm/N |
| BL Product (BL) | 16.2T·m |
| Maximum Linear Excursion (Xmax) | 6mm |
| Surface Area of Cone (Sd) | 363cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper / Kevlar |
| Surround Material | Rubber |
| Voice Coil Former | Kapton® / Polyimide |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 11.26" |
| Baffle Cutout Diameter | 9.29" |
| Depth | 4.41" |
| # Mounting Holes | 12 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.43ft³ |
| Sealed F3 | 77Hz |
| Vented Volume | 0.99ft³ |
| Vented F3 | 48Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item