SKU | PT-020_calor_taper-one |
---|---|
Weight | 0.0018 |
Brand | Pierced Tools |
Material | 304 Stainless Steel |
Calor Style Taper - Sold Price Per Taper - 20g through 00g Available
This calor style taper is made of 304 Stainless Steel. The taper can be autoclaved and reused. Each taper is 2" in length and tapers down 2 gauges smaller than the listed size. For example, a 0g (8mm) taper at its thinnest point is approximately 4g (5mm). Calor Style Tapers are thicker and recessed so you can fit the jewelry inside the taper; this helps prevent slipped while stretching. The chart bellow shows the thickness and diameter of the taper. Use this insertion taper pin to stretch your piercing.
The Calor Style is extremely difficult to make with a lot of waste. The other companies that have made this style make the tapers bigger to reduce damage and save on cost. We manufacture the thinnest wall, so that when you stretch, you are not over stretching.
Specifications:
Taper Dimension Chart:
Gauge | Diameter | Inner Diameter |
00g | 10.4mm | 10mm |
0.5g | 9.50mm | 9mm |
0g | 8.40mm | 8mm |
1g | 7.30mm | 7mm |
2g | 6.40mm | 6mm |
4g | 5.25mm | 5mm |
6g | 4.35mm | 4mm |
8g | 3.20mm | 3mm |
10g | 2.65mm | 2.5mm |
12g | 2.25mm | 2mm |
14g | 1.75mm | 1.6mm |
16g | 1.35mm | 1.2mm |
18g | 1.20mm | 1mm |
20g | 1.00mm | 0.8mm |
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Gauge | 18g, 16g | 14g, 12g | 10g–00g |
Internal Thread Pattern | 0.8mm or 0.9mm | 1.2mm | 2.0mm |
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
Gauge | 18g, 16g | 14g, 12g, 10g |
External Thread Pattern | 1.2mm | 1.6mm |
Attention CA Residents: Prop 65 Warning