0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: S-CD100L-2DB
Applicator: Brush, provides NO flushing action, applies 100% DeoxIT®,
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
KEY FEATURES:
Measurements and Specs
Applicator: Brush, provides NO flushing action, applies 100% DeoxIT®,
Formulation: 100% DeoxIT®.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Cleans and Preserves
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range, -34 C (-29 F) to +200 C (400 F)
Measurements and Specs
| % Volatility by Weight | 0% | |
| Deoxidizing Ability (% of Formulation) | 20% | |
| Dielectric Constant (Er) | 2.314 | |
| Dielectric Strength | 341 V/mil | |
| Electrical Conductivity | 4 X 10-10 S/m | |
| Evaporation Rate | ~0 | |
| Flash Point | 198°C | |
| Insulation Resistance | 1.25 X 1010 Ω | |
| Pour Point | < -27°C | |
| Solubility In Water | < 0.1% @ 25°C | |
| Specific Gravity | 0.884 | |
| Temperature Rating | -34°C to 200°C | |
| Total Acid Number | 51.50 mg KOH/g | |
| Vapor Pressure | < 0.01 mmHg @ 20°C | |
| Viscosity | 30.9 cSt | |
| Volume | 7.4 mL |
| Packaging Dimensions | 7.8 in. × 4 in. × 1.3 in. | |
| Weight (Packaging) | 0.169 lbs. |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item