skip to footer block
MIS Brush Research BC13424 Flex Hone Bc 1 3/4 240Sc P3598375MIS-BSBC13424 https://cdnimages.opentip.com/full/MIS/MIS-BSBC13424.jpg Brush Research BC13424 Flex Hone Bc 1 3/4 240Sc Flex-Hone Tool Type Standard Duty, Small Diameter Size 1-3/4 Inch Diameter X 8 Inch Length Applicable Standard Iso 9001 Abrasive Type Silicon Carbide Grit Size 240 End Marking Color Navy Blue Application Automotive, Military, Aerospace, Marine, General Industrial, Manufacturing, Oil And Gas, Firearm, Musical Instrument, Fluid Power, Hydraulic, Aluminum Extrusion, Earth Moving EquipmentFeatures / Benefits SURFACE FINISHING - The Flex-Hone Tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material The Flex-Hone is commonly used to reduce Ra, Rk and Rpk values while maintaining Rvk and Vo volume for oil retention Using the Flex-Hone Tool for surface finishing allows the sizing tools to do their jobs quickly and accurately without fighting surface finish The Flex-Hone is also used in adhesive bonding applications where a rougher surface is desired for bonding integrity DEBURRING - Debarring of cross drilled holes is an expensive, time consuming operation. The Flex-Hone Tool can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection Because of its unique construction, the Flex-Hone can be used online in machine tool applications or offline as a secondary operation The tool is self-cantering and self-aligning to the bore so elaborate, rigid set-ups are not required It is advisable to use the tool in the main bore into which the cross holes break Best results are obtained by rotating and stroking the tool a few strokes in a clockwise direction, removing the tool from the part, reversing the spindle and then rotating and stroking the tool in a counter clockwise direction for a few more strokes This forward and reverse rotation creates a more symmetrical debarring pattern PLATEAU FINISHING - Brush Research pioneered the concept of a plateau finish and is a strong proponent of the benefits of a cross hatch, plateaued finish The concept involves removing the peaks produced by prior machining operations and creating a substantially flat or plateau finish A plateau finish created by the elimination of peaks allows rings and seals to seat without damaging their edges The cross hatch pattern will aid in lubrication control and retention, reduce seepage in hydraulic and pneumatic applications and promote longer seal life Part Number: BC13424UNSPSC: 31191500 Specification Order Part Number BSBC13424 Item Desc FLEX HONE BC 1-3/4 240SC MANUFACTURER LONG NAME Brush Research Manufacturing Co., Inc. ADDITIONAL INFORMATION Abrasive Type Silicon Carbide; Grit Size 240; End Marking Color Navy Blue; Application Automotive, Military, Aerospace, Marine, General Industrial, Manufacturing, Oil and Gas, Firearm, Musical Instrument, Fluid Power, Hydraulic, Aluminum Extrusion, Earth Moving Equipment MANUFACTURER PART NUMBER BC13424 Product Group Id BS01 Country of Origin US Harmonization Code 82079000 Bin Code EN088 Default Selling Unit EA PROP 65 WARNING Yes Catalog Pages(s) Other Document 1 3598375 0.3700lbs 0.00 0.00 0.00
Brush Research
26.0700 2025-04-25 Only 1 left In Stock
customer review - by , October 10, 2023
5/ 5stars
This flex gone worked perfectly for honing out the OEM Suzuki DRZ 70 cylinder. We used 10-30 oil on the cylinder walls and sprayed the flex home with some WD-40. We ran the drill for 10 seconds in forward and 10 seconds in reverse and the flex hone left Percy cross-hatching in the cylinder walls. Engine is re-assembled and works great with lots of compression.
customer review - by , October 10, 2023
5/ 5stars
It was fairly easy to use although doing a top end on a snowmobile wasn't very easy. It honed out my cylinder enough to where it now has good compression. It is very useful to have.
customer review - by , September 9, 2023
5/ 5stars
High quality made to precision standards for honing cylinders. Works great when used as instructed.
customer review - by , August 8, 2023
5/ 5stars
THIS TOOL IS PRICED AT A REASONABLE PRICE AND OUR TECHNICIAN WAS ABLE TO COMPLETE THE JOB.
customer review - by , August 8, 2023
5/ 5stars
Worth every penny! It won't let me add the pics or else you'd be as impressed as I am!
customer review - by , July 7, 2023
5/ 5stars
what i needed
customer review - by , July 7, 2023
5/ 5stars
It was a gift and he likes it ordered 2 different ones
customer review - by , July 7, 2023
5/ 5stars
Works well in my cylinders and cleans them up well. Make sure to get the correct size
customer review - by , July 7, 2023
5/ 5stars
customer review - by , June 6, 2023
5/ 5stars
This cleaned up my snowmobile motor cylinder jugs. They looked new after second pass.

Brush Research BC13424 Flex Hone Bc 1-3/4 240Sc, Price/EACH

stars Rating 5 | 105 reviews
Shop more from MIS

SKU: MIS-BSBC13424
Price: $26.07
Quantity:
Only 1 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EACH.

  • Flex-Hone Tool
  • Type Standard Duty, Small Diameter
  • Size 1-3/4 Inch Diameter X 8 Inch Length
  • Applicable Standard Iso 9001
  • Abrasive Type Silicon Carbide
  • Grit Size 240
  • End Marking Color Navy Blue
  • Application Automotive, Military, Aerospace, Marine, General Industrial, Manufacturing, Oil And Gas, Firearm, Musical Instrument, Fluid Power, Hydraulic, Aluminum Extrusion, Earth Moving Equipment


Features / Benefits
  • SURFACE FINISHING - The Flex-Hone Tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material
  • The Flex-Hone is commonly used to reduce Ra, Rk and Rpk values while maintaining Rvk and Vo volume for oil retention
  • Using the Flex-Hone Tool for surface finishing allows the sizing tools to do their jobs quickly and accurately without fighting surface finish
  • The Flex-Hone is also used in adhesive bonding applications where a rougher surface is desired for bonding integrity
  • DEBURRING - Debarring of cross drilled holes is an expensive, time consuming operation. The Flex-Hone Tool can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection
  • Because of its unique construction, the Flex-Hone can be used online in machine tool applications or offline as a secondary operation
  • The tool is self-cantering and self-aligning to the bore so elaborate, rigid set-ups are not required
  • It is advisable to use the tool in the main bore into which the cross holes break
  • Best results are obtained by rotating and stroking the tool a few strokes in a clockwise direction, removing the tool from the part, reversing the spindle and then rotating and stroking the tool in a counter clockwise direction for a few more strokes
  • This forward and reverse rotation creates a more symmetrical debarring pattern
  • PLATEAU FINISHING - Brush Research pioneered the concept of a plateau finish and is a strong proponent of the benefits of a cross hatch, plateaued finish
  • The concept involves removing the peaks produced by prior machining operations and creating a substantially flat or plateau finish
  • A plateau finish created by the elimination of peaks allows rings and seals to seat without damaging their edges
  • The cross hatch pattern will aid in lubrication control and retention, reduce seepage in hydraulic and pneumatic applications and promote longer seal life


Part Number: BC13424

UNSPSC: 31191500


Specification



warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

Most Air and Power tools have a 90 days to one year warranty. Hand Tools are usually lifetime-abuse voids warranty.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 stars
97
4 stars
8
3 stars
0
2 stars
0
1 stars
0
By J
Date: October 30, 2023
This flex gone worked perfectly for honing out the OEM Suzuki DRZ 70 cylinder. We used 10-30 oil on the cylinder walls and sprayed the flex home with some WD-40. We ran the drill for 10 seconds in forward and 10 seconds in reverse and the flex hone left Percy cross-hatching in the cylinder walls. Engine is re-assembled and works great with lots of compression.
Rating: 5 stars [5 of 5 Stars!]
By ElsieFaith2008
Date: October 12, 2023
It was fairly easy to use although doing a top end on a snowmobile wasn't very easy. It honed out my cylinder enough to where it now has good compression. It is very useful to have.
Rating: 5 stars [5 of 5 Stars!]
By RTG
Date: September 30, 2023
High quality made to precision standards for honing cylinders. Works great when used as instructed.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: August 16, 2023
THIS TOOL IS PRICED AT A REASONABLE PRICE AND OUR TECHNICIAN WAS ABLE TO COMPLETE THE JOB.
Rating: 5 stars [5 of 5 Stars!]
By Dan
Date: August 11, 2023
Worth every penny! It won't let me add the pics or else you'd be as impressed as I am!
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: July 28, 2023
what i needed
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 105 reviews
 1  2  3  4  5 ...  [Next]