SGDEB Custom WB3940 750Ml 25 Oz. Stainless Steel Water Bottle 18/8 Stainless Steel With 0.4Mm Single Wall 9.5" H X 3" Diameter P9013427SGDEB-WB3940-1 https://cdnimages.opentip.com/full/SGDEB/SGDEB-WB3940.jpg Custom WB3940 750Ml 25 Oz. Stainless Steel Water Bottle 18/8 Stainless Steel With 0.4Mm Single Wall 9.5" H X 3" Diameter 9.5\" H x 3\" Diameter18/8 stainless steel with 0.4mm single wall Holds up to 750 ml (25 oz.) Safe alternative to plastic for your health and the environment Black plastic screw cap with carabineer BPA free (Bisphenol A) and FDA CompliantKeep plastic bottles out of our landfillsSP 1C - 7.5\" W x 5.5\" H (side)SP - 6\" W x 4.75\" H (side)ETCH (silver) - 0.75\" W x 4.5\" H (side) LAS (colours) - 0.75\"W x 4.5\" H (side)AQ - 3\" W x 3\" H (side) Aqua Mark not recommended on silver bottlesAdditional Colour/Location Decorating Costs for Screen Print, Transfer Print and/or Pad PrintUnder 500Over 500Additional ColorAdditional LocationAdditional ColorAdditional Location$0.80$0.90$0.60$0.70Billable SampleDue to the high cost or nature of this item, we will be invoicing your firm the end column no imprint cost when ordering a sample. Please note that if they are returned within 30 days in unused condition then the cost of the sample itself will be refunded. AQUA MARK (AQ)Aqua Mark Spot Colour printing - Minimum two colour imprint Set up charges are $55.00 per colour/design Utilize imprinted price and add the following run charges: Under 500 pieces: 2nd colour $1.80 Each additional colour after the 2nd colour $0.80 500 pieces or more 2nd colour $1.66 Each additional colour after the 2nd colour $0.60If you require an Aqua Mark in a 2nd location, an additional location running charge (based on quantity-see pricing grid on this page) AND applicable Aqua Mark running charges will apply. Repeat set up charge: One set up charge of $55.00 waived assuming previous purchase order or invoice number provided. Similar to traditional transfer printing, Aqua Mark has been developed exclusively for use on Our Ceramic, Glass, Porcelain and Stainless Steel drink ware. Ink is applied to a sheet of transfer paper instead of directly onto the material. The transfer is then applied directly onto the product. This method allows for spot colour separations (PMS colour match). A clear underlay is always required. A white underlay may be required on dark product colours or glass.Wrap-Around Screen PrintSet up charge $55.00 Repeat set up charge: 1st colour set up waived assuming previous purchase order or invoice number provided. Additional set ups are $55.00 each. Using the same concept as our screen printing method, a logo is evenly applied to a smooth, cylindrical surface using finer inks. The result is a 3/4 wrap-around imprint that is both crisp and clean.Laser Engraving (LAS)Set up charge $55.00 Repeat set up charge: waived assuming previous purchase order or invoice number provided. Additional set ups are $55.00 each. Your logo attains a refined and elegant look with engraving. The logo is carved directly into the surface using a laser. The even and clean lines create a novel and detailed logo. 9013427 0.20lbs 0.00 0.00 0.00
243 In Stock
Share to:

Custom WB3940 750Ml (25 Oz.) Stainless Steel Water Bottle, 18/8 Stainless Steel With 0.4Mm Single Wall, 9.5" H X 3" Diameter, Price/piece

See other products from SGDEB

Model: SGDEB-WB3940-1
List Price: $9.23
Unit Price: $4.86
You Save: $4.37 (47%)
Min.Order Price: $243.00 for 50 units
Imprint method:
Color:
Different Options Wanted?
Custom imprint:
Quantity:
In Stock
* Shipping Note: Usually ships within 1 to 2 weeks.
Click "Add to Cart" to calculate shipping and delivery time.
Price: $4.86 ea X 50 qty = $243.00
Quantity Price Save
50+ $4.86 0%
250+ $4.24 13%
500+ $4.04 17%
1000+ $3.89 20%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Product Description

Price is for piece.

9.5" H x 3" Diameter

18/8 stainless steel with 0.4mm single wall
Holds up to 750 ml (25 oz.)
Safe alternative to plastic for your health and the environment
Black plastic screw cap with carabineer
BPA free (Bisphenol A) and FDA Compliant

Keep plastic bottles out of our landfills

SP 1C - 7.5" W x 5.5" H (side)
SP - 6" W x 4.75" H (side)
ETCH (silver) - 0.75" W x 4.5" H (side)
LAS (colours) - 0.75"W x 4.5" H (side)
AQ - 3" W x 3" H (side)
Aqua Mark not recommended on silver bottles

Additional Colour/Location Decorating Costs for Screen Print, Transfer Print and/or Pad Print
Under 500Over 500
Additional ColorAdditional LocationAdditional ColorAdditional Location
$0.80$0.90$0.60$0.70


Billable Sample
Due to the high cost or nature of this item, we will be invoicing your firm the end column no imprint cost when ordering a sample. Please note that if they are returned within 30 days in unused condition then the cost of the sample itself will be refunded.


AQUA MARK (AQ)
Aqua Mark Spot Colour printing - Minimum two colour imprint
Set up charges are $55.00 per colour/design
Utilize imprinted price and add the following run charges:
Under 500 pieces:
2nd colour $1.80
Each additional colour after the 2nd colour $0.80
500 pieces or more
2nd colour $1.66
Each additional colour after the 2nd colour $0.60

If you require an Aqua Mark in a 2nd location, an additional location running charge (based on quantity-see pricing grid on this page) AND applicable Aqua Mark running charges will apply. Repeat set up charge: One set up charge of $55.00 waived assuming previous purchase order or invoice number provided.
Similar to traditional transfer printing, Aqua Mark has been developed exclusively for use on Our Ceramic, Glass, Porcelain and Stainless Steel drink ware. Ink is applied to a sheet of transfer paper instead of directly onto the material. The transfer is then applied directly onto the product. This method allows for spot colour separations (PMS colour match). A clear underlay is always required. A white underlay may be required on dark product colours or glass.

Wrap-Around Screen Print
Set up charge $55.00
Repeat set up charge: 1st colour set up waived assuming previous purchase order or invoice number provided. Additional set ups are $55.00 each.

Using the same concept as our screen printing method, a logo is evenly applied to a smooth, cylindrical surface using finer inks. The result is a 3/4 wrap-around imprint that is both crisp and clean.

Laser Engraving (LAS)
Set up charge $55.00
Repeat set up charge: waived assuming previous purchase order or invoice number provided. Additional set ups are $55.00 each.

Your logo attains a refined and elegant look with engraving. The logo is carved directly into the surface using a laser. The even and clean lines create a novel and detailed logo.

NOTE: All SGDEB- orders are subject to 5% overruns or underruns and will be billed accordingly. If exact quantity is required, please specify when you place orders and there is a $49 additional fee. PO box delivery is not available.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!

Your Recent History