skip to footer block
ETI Vestil CPRO 600 ergonomic work seat/chair 13 to 34 in h P8221591ETI-CPRO-600 https://cdnimages.opentip.com/full/ETI/ETI-CPRO-600.jpg Vestil CPRO 600 ergonomic work seat/chair 13 to 34 in h Manufacturer Part Number: CPRO-600The Ergonomic Worker Seat allows individuals to go from a low crouch position to a standing position. The seat height can be adjusted by moving the seat and hooking in to the horizontal bars located on the chair frame. The unit has four rubber \"shocks\" under the seat base that allow the seat to tilt forward, left, and right so it can accommodate your body movements. The front tilted position of the seat helps the user maintain the natural posture position of the spine. Footrest included.• Go from a low crouch position to a standing position• Move the seat and hook it in to the horizontal bars• Four rubber \"shocks\" under the seat mimic body movements• Maintain natural posture position of the spine• Material: Steel• Uniform Capacity (lbs.): 220• Base Width (in.): 14• Base Length (in.): 21• Seat Width (in.): 14• Seat Length (in.): 9• Seat Height Range Minimum (in.): 13• Seat Height Range Maximum (in.): 34• Seat Increments (in.): 2• Seat Material: Padded• Recommended Cleaning Method: Soap & Water• Assembly Required: NOProduct Dimensions: 21.25\'\'Length X 16.75\'\'Width X 36.625\'\'Height. 8221591 41.0900lbs 7.00 18.00 45.00
Vestil
262.2000 2025-04-25 25 In Stock
customer review - by , November 11, 2022
5/ 5stars
This chair simply works as advertised!!! It's very, very stable, easily carried, and extremely easily adjusted. I've found this chair soooo quickly adaptable as I lower the cushioned seat to peer through my red dot finder scope to center stars for alignment then raise the seat to center stars in my eyepiece. One of my very best astronomy buys. But I also use the chair when I clean my bike on its repair stand. Stores flat in my garage when I'm not using it! Such a versatile and useful chair!
customer review - by , August 8, 2021
4/ 5stars
sturdy, and does what I wanted but just a bit dear $$
customer review - by , January 1, 2021
5/ 5stars
After a few months of weekly use, this chair is an essential part of my observing setup. Surprisingly stable even with the seat at the top rungs. Easy to adjust the height and setup. Benefits of sitting vs standing at the telescope are well known, more stable viewing, less fatigue etc. Wish I had gotten one years ago.
customer review - by , September 9, 2020
4/ 5stars
I have yet to use it in the field, however, it is well made and I think it will work perfectly when I get out there with it.
customer review - by , June 6, 2020
5/ 5stars
Quick easy height adjustment, very nice heavy quality!
customer review - by , June 6, 2020
5/ 5stars
Love it. Very impressed with its quality build and functionality. A little heavy, but that's what adds to its sturdiness. 5 stars from this reviewer.
  »  
  »  
  »  
  »  
  »  

Vestil CPRO-600 ergonomic work seat/chair 13 to 34 in h, Price/EACH

stars Rating 5 | 6 reviews
Brand Vestil
Shop more from ETI
SKU: ETI-CPRO-600
Price: $262.20
Quantity:
Shipping:
$22.12 To [ 43215 ] Estimated Delivery Date: Apr 30, 2024 to May 2, 2024
25 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EACH.

Manufacturer Part Number: CPRO-600
The Ergonomic Worker Seat allows individuals to go from a low crouch position to a standing position. The seat height can be adjusted by moving the seat and hooking in to the horizontal bars located on the chair frame. The unit has four rubber "shocks" under the seat base that allow the seat to tilt forward, left, and right so it can accommodate your body movements. The front tilted position of the seat helps the user maintain the natural posture position of the spine. Footrest included.

• Go from a low crouch position to a standing position
• Move the seat and hook it in to the horizontal bars
• Four rubber "shocks" under the seat mimic body movements
• Maintain natural posture position of the spine
• Material: Steel
• Uniform Capacity (lbs.): 220
• Base Width (in.): 14
• Base Length (in.): 21
• Seat Width (in.): 14
• Seat Length (in.): 9
• Seat Height Range Minimum (in.): 13
• Seat Height Range Maximum (in.): 34
• Seat Increments (in.): 2
• Seat Material: Padded
• Recommended Cleaning Method: Soap & Water
• Assembly Required: NO

Product Dimensions: 21.25''Length X 16.75''Width X 36.625''Height.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

This item has 30 DAYS warranty.

Return Policy

All ETI- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 6 reviews
5 stars
4
4 stars
2
3 stars
0
2 stars
0
1 stars
0
Write a Review
By Kindle CustomerGeorge
Date: November 22, 2022
This chair simply works as advertised!!! It's very, very stable, easily carried, and extremely easily adjusted. I've found this chair soooo quickly adaptable as I lower the cushioned seat to peer through my red dot finder scope to center stars for alignment then raise the seat to center stars in my eyepiece. One of my very best astronomy buys. But I also use the chair when I clean my bike on its repair stand. Stores flat in my garage when I'm not using it! Such a versatile and useful chair!
Rating: 5 stars [5 of 5 Stars!]
By Stuart R. Brackney
Date: August 10, 2021
sturdy, and does what I wanted but just a bit dear $$
Rating: 4 stars [4 of 5 Stars!]
By Old Goat
Date: January 13, 2021
After a few months of weekly use, this chair is an essential part of my observing setup. Surprisingly stable even with the seat at the top rungs. Easy to adjust the height and setup. Benefits of sitting vs standing at the telescope are well known, more stable viewing, less fatigue etc. Wish I had gotten one years ago.
Rating: 5 stars [5 of 5 Stars!]
By toddisit
Date: September 18, 2020
I have yet to use it in the field, however, it is well made and I think it will work perfectly when I get out there with it.
Rating: 4 stars [4 of 5 Stars!]
By Doug Garven
Date: June 18, 2020
Quick easy height adjustment, very nice heavy quality!
Rating: 5 stars [5 of 5 Stars!]
By Sujit N.
Date: June 05, 2020
Love it. Very impressed with its quality build and functionality. A little heavy, but that's what adds to its sturdiness. 5 stars from this reviewer.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 6 reviews
 1