5 out of 5
Pricing Note
Product Description
Manufacturer Part Number: TiW 638Ft
For serious speaker builders that demand the world's best drivers, look no further than Morel's Titanium Advanced woofer series. The 6" TiW 638Ft features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
Key Features:
Morel TiW 638Ft Titanium Series Ferrite 6" Woofer 8 Ohm
Since 1975, Morel has been on an ever-evolving quest to create the perfect, ultimate loudspeaker. This dedication is apparent in every product they produce: tweeters, midranges, woofers, and finished systems that serve the Hi-Fi, home theater, and car audio markets. Morel systems are today sold in more than 55 countries around the globe. Their products are made with exceptional care; each is assembled by hand and extensively tested, undergoing seven different quality assurance steps, to ensure only the highest standards are met.
The Titanium Advanced woofer series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (that use hexagonal shaped wire for high sensitivity and power handling) are wound onto titanium bobbins for amazingly low energy storage, resulting in lightning quick transients for superior attack and decay transients. Qms is also raised, and allows for a wider range of enclosure options. Three magnetic systems are available: dual ferrite, Hybrid™ neodymium/ferrite, and Hybrid™ neodymium/ferrite with a Coppersleeve Neolin™ motor. Each is available in 4 and 8 ohm impedance.
All of this wouldn't mean anything if the air swept by the driver got trapped in the motor or frame. Morel designed the Uniflow chassis to be as open and sonically transparent as possible. An over-sized vent on the pole piece, a frame-suspended spider, and exposed voice coil combine to virtually eliminate reflections and output-robbing power compression. The Uniflow chassis also allows for the use of an over-sized spider for complete control of the over-sized voice coil.
The 6" TiW 638Ft woofer features a double ferrite magnet system, 8-ohm impedance, and a unique, one-piece DPC (Damped Polymer Composite) cone that offers flat frequency response from 40 Hz to 5,000 Hz on-axis, and from 40 Hz to 4,000 Hz off-axis. Its large voice coil allows it to handle 10 ms peak power transients of up to 1,000 watts when used correctly.
Specifications analyzed at 1V for more accurate cabinet design.
For serious speaker builders that demand the world's best drivers, look no further than Morel's Titanium Advanced woofer series. The 6" TiW 638Ft features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
Key Features:
- Open Uniflow aluminum diecast chassis for reduced reflections
- Double magnet ferrite system
- Titanium coil bobbin for low energy storage
- 3" Hexatech aluminum voice coil
- High 1,000W instantaneous power handling
Morel TiW 638Ft Titanium Series Ferrite 6" Woofer 8 Ohm
Since 1975, Morel has been on an ever-evolving quest to create the perfect, ultimate loudspeaker. This dedication is apparent in every product they produce: tweeters, midranges, woofers, and finished systems that serve the Hi-Fi, home theater, and car audio markets. Morel systems are today sold in more than 55 countries around the globe. Their products are made with exceptional care; each is assembled by hand and extensively tested, undergoing seven different quality assurance steps, to ensure only the highest standards are met.
Morel Titanium Advanced Series
The Titanium Advanced woofer series from Morel is the latest leap forward in woofer design. Huge 3" Hexatech™ aluminum voice coils (that use hexagonal shaped wire for high sensitivity and power handling) are wound onto titanium bobbins for amazingly low energy storage, resulting in lightning quick transients for superior attack and decay transients. Qms is also raised, and allows for a wider range of enclosure options. Three magnetic systems are available: dual ferrite, Hybrid™ neodymium/ferrite, and Hybrid™ neodymium/ferrite with a Coppersleeve Neolin™ motor. Each is available in 4 and 8 ohm impedance.
Uniflow?™ Aluminum Diecast Chassis
All of this wouldn't mean anything if the air swept by the driver got trapped in the motor or frame. Morel designed the Uniflow chassis to be as open and sonically transparent as possible. An over-sized vent on the pole piece, a frame-suspended spider, and exposed voice coil combine to virtually eliminate reflections and output-robbing power compression. The Uniflow chassis also allows for the use of an over-sized spider for complete control of the over-sized voice coil.
The 6" TiW 638Ft woofer features a double ferrite magnet system, 8-ohm impedance, and a unique, one-piece DPC (Damped Polymer Composite) cone that offers flat frequency response from 40 Hz to 5,000 Hz on-axis, and from 40 Hz to 4,000 Hz off-axis. Its large voice coil allows it to handle 10 ms peak power transients of up to 1,000 watts when used correctly.
Specifications analyzed at 1V for more accurate cabinet design.
Product Details | |
|---|---|
| Brand | Morel |
| Model | TiW 638Ft |
| Part Number | 297-101 |
| UPC | 848864002019 |
| Unit of Measure | Each |
| Weight | 2.6 |
Product Specifications | |
|---|---|
| Nominal Diameter | 6" |
| Power Handling (RMS) | 150 Watts |
| Power Handling (MAX) | 1000 Watts |
| Impedance | 8Ω |
| Frequency Response | 40 to 5,000Hz |
| Sensitivity | 86dB 2.83V/1m |
| Voice Coil Diameter | 3" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 35Hz |
| DC Resistance (Re) | 5.4Ω |
| Voice Coil Inductance (Le) | 0.63mH |
| Mechanical Q (Qms) | 4.63 |
| Electromagnetic Q (Qes) | 0.5 |
| Total Q (Qts) | 0.45 |
| Compliance Equivalent Volume (Vas) | 0.91ft³ |
| Maximum Linear Excursion (Xmax) | 4.25mm |
Materials of Construction | |
|---|---|
| Cone Material | Poly Composite |
| Surround Material | Rubber |
| Voice Coil Wire Material | Aluminum |
| Voice Coil Former | Titanium |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 6.3" |
| Baffle Cutout Diameter | 5.51" |
| Depth | 2.72" |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.41ft³ |
| Sealed F3 | 62Hz |
| Vented Volume | 1.08ft³ |
| Vented F3 | 31Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category