skip to footer block
AMN Accon Marine Top Mount Backing Plate for 10" Pull Up Cleat 209 Series P2084023AMN-209-10-TMP https://cdnimages.opentip.com/full/AMN/AMN-209-10-TMP.jpg Accon Marine Top Mount Backing Plate for 10" Pull Up Cleat 209 Series PRODUCT #DESCRIPTION209-4-TMP4 1/2" Top mount backing plate209-6-TMP6" Top mount backing plate209-8-TMP8" Top mount backing plate209-10-TMP10" Top mount backing plateFEATURESAllows for easy installation from above the deck.No need for access below the deck. INSTALLATIONPlace the template (backing plate) in the desired location.  Make sure that there is adequate clearance for the Pop-Up® or Pull-Up mechanism below the deck.Trace the cleat cut-out area and spot the small threaded hole.  Do not spot the four mounting holes yet.Cut out the cleat installation area.Drill a 3/16" diameter hole for the #6 screw.Place cleat in cut-out and spot the four mounting holes.Remote the cleat and drill the four mounting holes.Place the backing plate through the cut-out and install the #6 screw through the deck into the backing plate.  Be careful not to drop the backing plate down into the hull.  Do not overtighten the #6 screw.Replace the cleat into the cut-out and install the four mounting screws through the cleat and deck into the backing plate.Please note, all of our cleats are measured by the handle. Please refer to the drawing. 2084023 1.0000lbs 0.00 0.00 0.00
Accon Marine
38.4600 2025-04-19 Discontinued

Accon Marine Top-Mount Backing Plate for 10" Pull-Up Cleat (209 Series)

Brand Accon Marine
See other products from AMN

SKU: AMN-209-10-TMP
Price: $38.46
Need cleat:
Quantity:
Discontinued
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description



FEATURES

  • Allows for easy installation from above the deck.
  • No need for access below the deck. 


INSTALLATION

  • Place the template (backing plate) in the desired location.  Make sure that there is adequate clearance for the Pop-Up® or Pull-Up mechanism below the deck.
  • Trace the cleat cut-out area and spot the small threaded hole.  Do not spot the four mounting holes yet.
  • Cut out the cleat installation area.
  • Drill a 3/16" diameter hole for the #6 screw.
  • Place cleat in cut-out and spot the four mounting holes.
  • Remote the cleat and drill the four mounting holes.
  • Place the backing plate through the cut-out and install the #6 screw through the deck into the backing plate.  Be careful not to drop the backing plate down into the hull.  Do not overtighten the #6 screw.
  • Replace the cleat into the cut-out and install the four mounting screws through the cleat and deck into the backing plate.


Please note, all of our cleats are measured by the handle. Please refer to the drawing.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!