skip to footer block
HDL FastCap Flush Mount Pilot Bit for FCMICRO P1974876HDL-FCDBMCINNERBIT https://cdnimages.opentip.com/full/HDL/HDL-FCDBMCINNERBIT.jpg FastCap Flush Mount Pilot Bit for FCMICRO Flush Mount BitDrill a pilot hole and cap recess in one operation Flush Mount BitUnit: EAView Detail 1974876 663807800947 0.0500lbs 0.00 0.00 0.00
FastCap
5.3300 2025-04-25 15 In Stock
customer review - by , September 9, 2023
5/ 5stars
I used this tool to remove a plastic layer over metal to install Plusnuts. Depth of cut was critical since I did not want to remove any of the rust resistant coating on the metal. I was astonished how easy it was to accurately set the depth of cut and have it stay accurate over many cuts
customer review - by , May 5, 2022
5/ 5stars
Lo utilizo para mis trabajos.
customer review - by , May 5, 2022
5/ 5stars
Lo utilizo para mis trabajos.
customer review - by , January 1, 2022
5/ 5stars
Wasn't sure that this was worth the price, but once I used it I was convinced. Well designed, well engineered. Allows adjustments for different screw length and desired counter sink depth. There's also a threaded collar to fine tune the counter sink with thumb screw to lock it in. Depth collar is independent from spinning parts so it does not mar work piece. Kit includes two hex keys for the two set screws that control drilling depth and counter sink, two spare drill bits, as well as spare set screws and thumb screw in a square plastic storage tube. Yeah, you get few sample screws, too.Do you need this to install Fastcap screws? Nope. If you want consistent, professional results then you should consider it.
customer review - by , January 1, 2022
5/ 5stars
Wasn't sure that this was worth the price, but once I used it I was convinced. Well designed, well engineered. Allows adjustments for different screw length and desired counter sink depth. There's also a threaded collar to fine tune the counter sink with thumb screw to lock it in. Depth collar is independent from spinning parts so it does not mar work piece. Kit includes two hex keys for the two set screws that control drilling depth and counter sink, two spare drill bits, as well as spare set screws and thumb screw in a square plastic storage tube. Yeah, you get few sample screws, too.Do you need this to install Fastcap screws? Nope. If you want consistent, professional results then you should consider it.
customer review - by , November 11, 2021
4/ 5stars
Me gust mucho lo compacto del artculo
customer review - by , November 11, 2021
4/ 5stars
Me gust mucho lo compacto del artculo
customer review - by , April 4, 2021
5/ 5stars
Works as described
customer review - by , April 4, 2021
5/ 5stars
The Flashpoint drill bit is perfect for cabinet makers. It's one of those tools that should be in every cabinet makers tool box. It's inexpensive high quality and very easy to set and use.I wouldn't be without it.
customer review - by , March 3, 2021
5/ 5stars
If you're using FastCap Power Head Screws to hang cabinets, this is a must. You can really dial in how far you want to sink the head, and so easily.Don't be that guy who uses great hardware but doesn't properly prep it.I will buy more of these without a second thought.

FastCap Flush Mount Pilot Bit for FCMICRO, Price/Each

stars Rating 5 | 11 reviews
Brand FastCap
Shop more from HDL

UPC: 663807800947
SKU: HDL-FCDBMCINNERBIT
Price: $5.33
Quantity:
15 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Optional related products

Product Description

Price is for Each.

Flush Mount Bit

  • Drill a pilot hole and cap recess in one operation


Flush Mount Bit

  • Unit: EA
  • View Detail
  • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    We do not accept returns if the product has been tried to be installed.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    5 stars
    9
    4 stars
    2
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By jfreischuetz
    Date: September 30, 2023
    I used this tool to remove a plastic layer over metal to install Plusnuts. Depth of cut was critical since I did not want to remove any of the rust resistant coating on the metal. I was astonished how easy it was to accurately set the depth of cut and have it stay accurate over many cuts
    Rating: 5 stars [5 of 5 Stars!]
    By fernando arias
    Date: May 14, 2022
    Lo utilizo para mis trabajos.
    Rating: 5 stars [5 of 5 Stars!]
    By A Customer
    Date: May 14, 2022
    Lo utilizo para mis trabajos.
    Rating: 5 stars [5 of 5 Stars!]
    By JeffMon23
    Date: January 03, 2022
    Wasn't sure that this was worth the price, but once I used it I was convinced. Well designed, well engineered. Allows adjustments for different screw length and desired counter sink depth. There's also a threaded collar to fine tune the counter sink with thumb screw to lock it in. Depth collar is independent from spinning parts so it does not mar work piece. Kit includes two hex keys for the two set screws that control drilling depth and counter sink, two spare drill bits, as well as spare set screws and thumb screw in a square plastic storage tube. Yeah, you get few sample screws, too.Do you need this to install Fastcap screws? Nope. If you want consistent, professional results then you should consider it.
    Rating: 5 stars [5 of 5 Stars!]
    By fernando arias
    Date: January 03, 2022
    Wasn't sure that this was worth the price, but once I used it I was convinced. Well designed, well engineered. Allows adjustments for different screw length and desired counter sink depth. There's also a threaded collar to fine tune the counter sink with thumb screw to lock it in. Depth collar is independent from spinning parts so it does not mar work piece. Kit includes two hex keys for the two set screws that control drilling depth and counter sink, two spare drill bits, as well as spare set screws and thumb screw in a square plastic storage tube. Yeah, you get few sample screws, too.Do you need this to install Fastcap screws? Nope. If you want consistent, professional results then you should consider it.
    Rating: 5 stars [5 of 5 Stars!]
    By JeffMon23
    Date: November 22, 2021
    Me gust mucho lo compacto del artculo
    Rating: 4 stars [4 of 5 Stars!]
    Items 1 - 6 of 11 reviews
     1  2  [Next]