5 out of 5
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: RSS210HF-4
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look.
- Extensively vented motor eliminates compression and allows quiet excursion
- Lightweight black anodized aluminum cone for rigidity and lower moving mass
- Suitable for sealed or vented enclosures
- Triple shorting ring motor for ultra-low distortion
- 2-layer coil for reduced back EMF
- Highest quality materials throughout for long-lasting performance
Dayton Audio RSS210HF-4 8" Reference Series HF Subwoofer 4 Ohm
The Dayton Audio Reference Series subwoofers take the quality and performance of the much acclaimed RS line into the subwoofer realm. As with the rest of the Reference Series, the main focus of these subwoofers is ultra-low-distortion. Second, third, and intemodulation distortion are kept extremely low by utilizing three short-circuit paths within the motor structure. A durable aramid fiber spider and extensive venting throughout provide quiet and uniform excursion. The black anodized cone, rubber surround, and custom basket give this driver a unique, high-end look. Choose the high fidelity version for home systems when you are looking for clean, low bass and are not restricted by cabinet size.
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | RSS210HF-4 |
| Part Number | 295-456 |
| UPC | 844632062308 |
| Unit of Measure | Each |
| Weight | 8.8 |
Product Specifications | |
|---|---|
| Nominal Diameter | 8" |
| Moving Mass Of Diaphragm (Mmd) | 78.4 |
| Power Handling (RMS) | 280 Watts |
| Power Handling (MAX) | 560 Watts |
| Impedance | 4Ω |
| Frequency Response | 27 to 1,000Hz |
| Sensitivity | 85.6dB 2.83V/1m |
| Voice Coil Diameter | 2" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 29.6Hz |
| DC Resistance (Re) | 3.1Ω |
| Voice Coil Inductance (Le) | 0.7mH |
| Mechanical Q (Qms) | 3.25 |
| Electromagnetic Q (Qes) | 0.69 |
| Total Q (Qts) | 0.57 |
| Compliance Equivalent Volume (Vas) | 0.84ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.37mm/N |
| BL Product (BL) | 8.12T·m |
| Maximum Linear Excursion (Xmax) | 9mm |
| Surface Area of Cone (Sd) | 219cm² |
Materials of Construction | |
|---|---|
| Cone Material | Aluminum |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 8.39" |
| Baffle Cutout Diameter | 7.28" |
| Depth | 4.88" |
| # Mounting Holes | 6 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.55ft³ |
| Sealed F3 | 48Hz |
| Vented Volume | 1.76ft³ |
| Vented F3 | 24Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Onevoice
Date: November 23, 2016
This subwoofer is made from very high quality material. The bass is tight and very accurate. I'm very satisfied with this.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By M. Wickham
Date: August 06, 2010
Using the sub in a 0.75 cf sealed box to add foundation to my French stand mounted speakers. Love my speakers, but they need help in the low bass, and this sub seems ideal. Had been using the cheaper dayton 8" in a slightly smaller box, and it is an excellent woofer, but this sub extends lower in freq. and has more output down there. Matching a sub to quality speakers can be frustrating, and this is the 5th or 6th sub have used with the Triangle Comete speakers. Problem has been finding a sub quick enought to blend with the Triangles, which are Very fast. Both this driver and the cheaper dual v.c. 8" are able to match the speed of the speakers, but this HF4 provides more solid foundation under the Cometes......very satisfied with this high quality product.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 2 of 2 reviews
1